-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for ISO1H811G by Infineon Technologies AG
Results Overview of ISO1H811G by Infineon Technologies AG
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (6 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
ISO1H811G Information
ISO1H811G by Infineon Technologies AG is a Peripheral Driver.
Peripheral Drivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for ISO1H811G
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
726-ISO1H811G
|
Mouser Electronics | Gate Drivers DRIVER IC'S RoHS: Compliant | 1706 |
|
$4.8700 / $10.0300 | Buy Now |
|
|
LCSC | 3V5.5V 200m Active Low 8 High-side switch DSO-36 Power Distribution Switches ROHS | 21 |
|
$7.0564 / $10.0309 | Buy Now |
|
|
Win Source Electronics | IC SWITCH HISIDE 8CH DSO-36 | 19843 |
|
$5.9226 / $8.8840 | Buy Now |
Part Details for ISO1H811G
ISO1H811G CAD Models
ISO1H811G Part Data Attributes
|
|
ISO1H811G
Infineon Technologies AG
Buy Now
Datasheet
|
Compare Parts:
ISO1H811G
Infineon Technologies AG
Buffer/Inverter Based Peripheral Driver, 8 Driver, 0.7A, CMOS, PDSO36, 0.430 INCH, GREEN, PLASTIC, SOP-36
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | INFINEON TECHNOLOGIES AG | |
| Part Package Code | SOIC | |
| Package Description | 0.430 INCH, GREEN, PLASTIC, SOP-36 | |
| Pin Count | 36 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Infineon | |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE | |
| Driver Number of Bits | 8 | |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER | |
| JESD-30 Code | R-PDSO-G36 | |
| JESD-609 Code | e3 | |
| Length | 15.9 mm | |
| Moisture Sensitivity Level | 3 | |
| Number of Functions | 1 | |
| Number of Terminals | 36 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -25 °C | |
| Output Current Flow Direction | SINK | |
| Output Current-Max | 0.625 A | |
| Output Peak Current Limit-Nom | 0.7 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HSSOP | |
| Package Equivalence Code | SSOP36,.56 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 3.5 mm | |
| Supply Current-Max | 6 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Supply Voltage1-Max | 30 V | |
| Supply Voltage1-Min | 15 V | |
| Surface Mount | YES | |
| Temperature Grade | OTHER | |
| Terminal Finish | Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Turn-off Time | 170 µs | |
| Turn-on Time | 120 µs | |
| Width | 11 mm |
Alternate Parts for ISO1H811G
This table gives cross-reference parts and alternative options found for ISO1H811G. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ISO1H811G, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MC33879TEK | NXP Semiconductors | $4.1023 | 1.2A BUF OR INV BASED PRPHL DRVR, PDSO32 | ISO1H811G vs MC33879TEK |
| 935317184518 | NXP Semiconductors | Check for Price | Buffer/Inverter Based Peripheral Driver | ISO1H811G vs 935317184518 |
| 935310502574 | NXP Semiconductors | Check for Price | Buffer/Inverter Based Peripheral Driver | ISO1H811G vs 935310502574 |
| MC33879EK | Freescale Semiconductor | Check for Price | BUF OR INV BASED PRPHL DRVR, PDSO32, 0.65 MM PITCH, LEAD FREE, SOIC-32 | ISO1H811G vs MC33879EK |
| MC33879APEKR2,518 | NXP Semiconductors | Check for Price | Buffer/Inverter Based Peripheral Driver, 0.6A, BCDMOS, PDSO32 | ISO1H811G vs MC33879APEKR2,518 |
| 935310502518 | NXP Semiconductors | Check for Price | Buffer/Inverter Based Peripheral Driver | ISO1H811G vs 935310502518 |
ISO1H811G Frequently Asked Questions (FAQ)
-
The maximum operating temperature range for the ISO1H811G is -40°C to 125°C.
-
To ensure EMC, follow proper PCB design and layout guidelines, use a common mode choke, and add EMI filters if necessary.
-
Follow the recommended layout and routing guidelines in the datasheet, keeping sensitive signals away from noisy signals and using a solid ground plane.
-
Use a common mode choke, add EMI filters, and ensure proper PCB design and layout to minimize high-frequency switching noise.
-
The maximum current rating for the ISO1H811G is 1 A per channel.