Part Details for IS25LD040-JBLE by Integrated Silicon Solution Inc
Results Overview of IS25LD040-JBLE by Integrated Silicon Solution Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Internet of Things (IoT)
Environmental Monitoring
Financial Technology (Fintech)
Smart Cities
Transportation and Logistics
Agriculture Technology
Telecommunications
Virtual Reality (VR), Augmented Reality (AR), and Vision Systems
Education and Research
Consumer Electronics
Security and Surveillance
Audio and Video Systems
Computing and Data Storage
Healthcare
Entertainment and Gaming
IS25LD040-JBLE Information
IS25LD040-JBLE by Integrated Silicon Solution Inc is a Flash Memory.
Flash Memories are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for IS25LD040-JBLE
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
IS25LD040-JBLE
|
EBV Elektronik | (Alt: IS25LD040-JBLE) RoHS: Compliant Min Qty: 90 Package Multiple: 90 Lead time: 26 Weeks, 0 Days | EBV - 0 |
|
Buy Now |
Part Details for IS25LD040-JBLE
IS25LD040-JBLE CAD Models
IS25LD040-JBLE Part Data Attributes
|
|
IS25LD040-JBLE
Integrated Silicon Solution Inc
Buy Now
Datasheet
|
Compare Parts:
IS25LD040-JBLE
Integrated Silicon Solution Inc
Flash, 512KX8, PDSO8, 0.208 INCH, LEAD FREE, SOIC-8
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | INTEGRATED SILICON SOLUTION INC | |
| Package Description | SOP, SOP8,.3 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.32.00.51 | |
| Clock Frequency-Max (fCLK) | 100 MHz | |
| Data Retention Time-Min | 20 | |
| Endurance | 200000 Write/Erase Cycles | |
| JESD-30 Code | S-PDSO-G8 | |
| Length | 5.28 mm | |
| Memory Density | 4194304 bit | |
| Memory IC Type | FLASH | |
| Memory Width | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Number of Words | 524288 words | |
| Number of Words Code | 512000 | |
| Operating Mode | SYNCHRONOUS | |
| Operating Temperature-Max | 105 °C | |
| Operating Temperature-Min | -40 °C | |
| Organization | 512KX8 | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.3 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE | |
| Parallel/Serial | SERIAL | |
| Programming Voltage | 2.7 V | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.16 mm | |
| Serial Bus Type | SPI | |
| Standby Current-Max | 0.00001 A | |
| Supply Current-Max | 0.03 mA | |
| Supply Voltage-Max (Vsup) | 3.6 V | |
| Supply Voltage-Min (Vsup) | 2.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Type | NOR TYPE | |
| Width | 5.28 mm | |
| Write Protection | HARDWARE/SOFTWARE |
Alternate Parts for IS25LD040-JBLE
This table gives cross-reference parts and alternative options found for IS25LD040-JBLE. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of IS25LD040-JBLE, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| M25P40SVMN6PB | Numonyx Memory Solutions | Check for Price | EEPROM, 512KX8, Serial, CMOS, PDSO8, 0.150 INCH, ROHS COMPLIANT, PLASTIC, SOP-8 | IS25LD040-JBLE vs M25P40SVMN6PB |
| M25P40SVMN3TPBA | Numonyx Memory Solutions | Check for Price | EEPROM, 512KX8, Serial, CMOS, PDSO8, 0.150 INCH, ROHS COMPLIANT, PLASTIC, SOP-8 | IS25LD040-JBLE vs M25P40SVMN3TPBA |
| W25Q40BLSNIG | Winbond Electronics Corp | Check for Price | Flash, 4MX1, PDSO8, 3.81 MM, GREEN, PLASTIC, SOIC-8 | IS25LD040-JBLE vs W25Q40BLSNIG |
| M25P40SVMN6TP/X | Numonyx Memory Solutions | Check for Price | EEPROM, 512KX8, Serial, CMOS, PDSO8, 0.150 INCH, ROHS COMPLIANT, PLASTIC, SOP-8 | IS25LD040-JBLE vs M25P40SVMN6TP/X |
| W25X40LSSC | Winbond Electronics Corp | Check for Price | Flash, 4MX1, PDSO8, 0.208 INCH, PLASTIC, SOIC-8 | IS25LD040-JBLE vs W25X40LSSC |
| S25FL040A0LVAI010 | Spansion | Check for Price | Flash, 4MX1, PDSO8, 0.150 INCH, PLASTIC, MS-012AA, SOP-8 | IS25LD040-JBLE vs S25FL040A0LVAI010 |
| M25P40-VMN6TG/4 | Numonyx Memory Solutions | Check for Price | EEPROM, 512KX8, Serial, CMOS, PDSO8, 0.150 INCH, ROHS COMPLIANT, PLASTIC, SOP-8 | IS25LD040-JBLE vs M25P40-VMN6TG/4 |
| S25FL004A0LMAI000 | Spansion | Check for Price | Flash, 4MX1, PDSO8, 0.208 INCH, PLASTIC, SOP-8 | IS25LD040-JBLE vs S25FL004A0LMAI000 |
| M25P40-VMN3G/XA | Numonyx Memory Solutions | Check for Price | EEPROM, 512KX8, Serial, CMOS, PDSO8, 0.150 INCH, ROHS COMPLIANT, PLASTIC, SOP-8 | IS25LD040-JBLE vs M25P40-VMN3G/XA |
| M25P40-VMN6TP/4 | Numonyx Memory Solutions | Check for Price | EEPROM, 512KX8, Serial, CMOS, PDSO8, 0.150 INCH, ROHS COMPLIANT, PLASTIC, SOP-8 | IS25LD040-JBLE vs M25P40-VMN6TP/4 |
IS25LD040-JBLE Frequently Asked Questions (FAQ)
-
The maximum operating temperature range for the IS25LD040-JBLE is -40°C to 85°C.
-
To ensure data integrity during power-down or power-up cycles, it is recommended to use the WP# pin to protect the memory from unwanted writes, and to use the RST# pin to reset the device before accessing the memory.
-
The recommended clock frequency for the IS25LD040-JBLE is up to 104 MHz, but it can operate at frequencies as low as 10 kHz.
-
Page erase and block erase operations can be performed using the specific commands and protocols outlined in the datasheet. It is recommended to use the chip erase command to erase the entire memory array, and then use the page or block erase commands to erase specific sections of memory.
-
The typical programming time for the IS25LD040-JBLE is around 10-15 μs per byte, but this can vary depending on the specific operating conditions and the type of memory being programmed.