Part Details for IMX1T108 by ROHM Semiconductor
Results Overview of IMX1T108 by ROHM Semiconductor
- Distributor Offerings: (4 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Security and Surveillance
IMX1T108 Information
IMX1T108 by ROHM Semiconductor is a Small Signal Bipolar Transistor.
Small Signal Bipolar Transistors are under the broader part category of Transistors.
A transistor is a small semiconductor device used to amplify, control, or create electrical signals. When selecting a transistor, factors such as voltage, current rating, gain, and power dissipation must be considered, with common types. Read more about Transistors on our Transistors part category page.
Price & Stock for IMX1T108
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
846-IMX1T108TR-ND
|
DigiKey | TRANS 2NPN DUAL 50V 150MA SMT6 Min Qty: 3000 Lead time: 18 Weeks Container: Tape & Reel (TR) | Limited Supply - Call |
|
$0.1050 / $0.1439 | Buy Now |
|
DISTI #
755-IMX1T108
|
Mouser Electronics | Bipolar Transistors - BJT TRANS GP BJT NPN 50V 0.15A 6PIN RoHS: Compliant | 0 |
|
Order Now | |
|
|
Bristol Electronics | 2910 |
|
RFQ | ||
|
|
Quest Components | 2328 |
|
$0.1280 / $0.6400 | Buy Now |
Part Details for IMX1T108
IMX1T108 CAD Models
IMX1T108 Part Data Attributes
|
|
IMX1T108
ROHM Semiconductor
Buy Now
Datasheet
|
Compare Parts:
IMX1T108
ROHM Semiconductor
Small Signal Bipolar Transistor, 0.1A I(C), 40V V(BR)CEO, 2-Element, NPN, Silicon
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ROHM CO LTD | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| Samacsys Manufacturer | ROHM Semiconductor | |
| Collector Current-Max (IC) | 0.1 A | |
| Collector-Emitter Voltage-Max | 40 V | |
| Configuration | SEPARATE, 2 ELEMENTS | |
| DC Current Gain-Min (hFE) | 120 | |
| JESD-30 Code | R-PDSO-G6 | |
| JESD-609 Code | e1 | |
| Number of Elements | 2 | |
| Number of Terminals | 6 | |
| Operating Temperature-Max | 150 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Polarity/Channel Type | NPN | |
| Qualification Status | Not Qualified | |
| Surface Mount | YES | |
| Terminal Finish | TIN SILVER COPPER | |
| Terminal Form | GULL WING | |
| Terminal Position | DUAL | |
| Transistor Application | AMPLIFIER | |
| Transistor Element Material | SILICON | |
| VCEsat-Max | 0.4 V |
IMX1T108 Frequently Asked Questions (FAQ)
-
ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane or a dedicated heat sink.
-
To ensure reliable operation at high temperatures, it's essential to follow the recommended operating conditions, including the maximum junction temperature (Tj) of 150°C. Additionally, consider using a heat sink, and ensure good airflow around the device. ROHM also recommends using a thermal interface material (TIM) between the device and the heat sink.
-
ROHM recommends using a ceramic capacitor with a value between 1uF to 10uF, and an X7R or X5R dielectric. The capacitor should be placed as close as possible to the VIN pin of the device, and should have a low ESR (Equivalent Series Resistance) to minimize voltage ripple.
-
To protect the IMX1T108 from overvoltage and undervoltage conditions, consider using a voltage supervisor or a reset IC that can detect and respond to out-of-range voltage conditions. Additionally, use a TVS (Transient Voltage Suppressor) diode or a zener diode to clamp the input voltage to a safe level.
-
ROHM recommends using a ceramic capacitor with a value between 1uF to 10uF, and an X7R or X5R dielectric. The capacitor should be placed as close as possible to the VOUT pin of the device, and should have a low ESR to minimize voltage ripple and ensure stable output voltage.