Part Details for IDTCV110NPVG8 by Integrated Device Technology Inc
Results Overview of IDTCV110NPVG8 by Integrated Device Technology Inc
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
IDTCV110NPVG8 Information
IDTCV110NPVG8 by Integrated Device Technology Inc is a Clock Generator.
Clock Generators are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Part Details for IDTCV110NPVG8
IDTCV110NPVG8 CAD Models
IDTCV110NPVG8 Part Data Attributes
|
|
IDTCV110NPVG8
Integrated Device Technology Inc
Buy Now
Datasheet
|
Compare Parts:
IDTCV110NPVG8
Integrated Device Technology Inc
Processor Specific Clock Generator, 400MHz, PDSO56, GREEN, SSOP-56
|
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | INTEGRATED DEVICE TECHNOLOGY INC | |
| Part Package Code | SSOP | |
| Package Description | GREEN, SSOP-56 | |
| Pin Count | 56 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| JESD-30 Code | R-PDSO-G56 | |
| JESD-609 Code | e3 | |
| Length | 18.415 mm | |
| Number of Terminals | 56 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Clock Frequency-Max | 400 MHz | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SSOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, SHRINK PITCH | |
| Primary Clock/Crystal Frequency-Nom | 14.31818 MHz | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.794 mm | |
| Supply Voltage-Max | 3.465 V | |
| Supply Voltage-Min | 3.135 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.635 mm | |
| Terminal Position | DUAL | |
| Width | 7.5 mm | |
| uPs/uCs/Peripheral ICs Type | CLOCK GENERATOR, PROCESSOR SPECIFIC |
Alternate Parts for IDTCV110NPVG8
This table gives cross-reference parts and alternative options found for IDTCV110NPVG8. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of IDTCV110NPVG8, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| IDTCV110NPV | Integrated Device Technology Inc | Check for Price | Processor Specific Clock Generator, 400MHz, PDSO56, SSOP-56 | IDTCV110NPVG8 vs IDTCV110NPV |