Part Details for IDP15E65D1 by Infineon Technologies AG
Results Overview of IDP15E65D1 by Infineon Technologies AG
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
IDP15E65D1 Information
IDP15E65D1 by Infineon Technologies AG is a Rectifier Diode.
Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for IDP15E65D1
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
726-IDP15E65D1
|
Mouser Electronics | Small Signal Switching Diodes IGBT PRODUCTS Rapid Switching RoHS: Compliant | 981 |
|
$0.5650 / $1.5400 | Buy Now |
|
|
Wuhan P&S | 650V,15A,Fast Recovery Rectifiers Min Qty: 1 | 4 |
|
$0.8100 / $1.1300 | Buy Now |
Part Details for IDP15E65D1
IDP15E65D1 CAD Models
IDP15E65D1 Part Data Attributes
|
|
IDP15E65D1
Infineon Technologies AG
Buy Now
Datasheet
|
Compare Parts:
IDP15E65D1
Infineon Technologies AG
Rectifier Diode, 1 Phase, 1 Element, 30A, 650V V(RRM), Silicon, TO-220AC, TO-220-2-1, 2 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | INFINEON TECHNOLOGIES AG | |
| Package Description | TO-220-2-1, 2 PIN | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.80 | |
| Samacsys Manufacturer | Infineon | |
| Additional Feature | FREE WHEELING DIODE, PD-CASE, SOFT FACTOR IS 1 | |
| Application | ULTRA FAST RECOVERY | |
| Case Connection | CATHODE | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | RECTIFIER DIODE | |
| Forward Voltage-Max (VF) | 1.7 V | |
| JEDEC-95 Code | TO-220AC | |
| JESD-30 Code | R-PSFM-T2 | |
| JESD-609 Code | e3 | |
| Non-rep Pk Forward Current-Max | 120 A | |
| Number of Elements | 1 | |
| Number of Phases | 1 | |
| Number of Terminals | 2 | |
| Operating Temperature-Max | 175 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current-Max | 30 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | FLANGE MOUNT | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Power Dissipation-Max | 92 W | |
| Rep Pk Reverse Voltage-Max | 650 V | |
| Reverse Current-Max | 40 µA | |
| Reverse Recovery Time-Max | 0.114 µs | |
| Surface Mount | NO | |
| Terminal Finish | Tin (Sn) | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Position | SINGLE | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
Alternate Parts for IDP15E65D1
This table gives cross-reference parts and alternative options found for IDP15E65D1. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of IDP15E65D1, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| IDP15E65D1XKSA1 | Infineon Technologies AG | $0.7758 | Rectifier Diode, 1 Phase, 1 Element, 30A, 650V V(RRM), Silicon, TO-220AC, TO-220-2-1, 2 PIN | IDP15E65D1 vs IDP15E65D1XKSA1 |
| RJU6054SDPE-00#J3 | Renesas Electronics Corporation | Check for Price | Fast Recovery Diodes, LDPAK(S)-(1), /Tube | IDP15E65D1 vs RJU6054SDPE-00#J3 |
| RJU6054SDPK-M0#T3 | Renesas Electronics Corporation | Check for Price | RECTIFIER DIODE | IDP15E65D1 vs RJU6054SDPK-M0#T3 |
IDP15E65D1 Frequently Asked Questions (FAQ)
-
Infineon provides a dedicated application note (AN2014-01) that outlines the recommended PCB layout and thermal management guidelines for the IDP15E65D1. It's essential to follow these guidelines to ensure optimal performance, reliability, and thermal dissipation.
-
When selecting a gate driver for the IDP15E65D1, consider factors such as the driver's output current capability, voltage rating, and propagation delay. Infineon recommends using a gate driver with a high current capability (e.g., 2A or higher) and a low propagation delay (e.g., <10ns) to ensure proper switching and minimize losses.
-
To ensure reliability and prevent failure, monitor critical parameters such as junction temperature (Tj), drain-source voltage (Vds), gate-source voltage (Vgs), and drain current (Id). Implement over-temperature protection, over-voltage protection, and over-current protection to prevent damage to the device.
-
Implement over-current protection using a dedicated current sense resistor (Rcs) and a comparator or a dedicated over-current protection IC. Monitor the current sense voltage (Vcs) and compare it to a predetermined threshold. If the current exceeds the threshold, trigger a shutdown or fault signal to protect the device.
-
Follow Infineon's recommended soldering and assembly guidelines, which include using a soldering iron with a temperature range of 250°C to 260°C, a soldering time of <3 seconds, and a peak temperature of <260°C. Ensure proper cleaning and handling of the device to prevent damage and contamination.