Part Details for ICS83905AGLFT by Integrated Device Technology Inc
Results Overview of ICS83905AGLFT by Integrated Device Technology Inc
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (5 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Audio and Video Systems
Energy and Power Systems
Medical Imaging
Entertainment and Gaming
Robotics and Drones
ICS83905AGLFT Information
ICS83905AGLFT by Integrated Device Technology Inc is a Clock Generator.
Clock Generators are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Part Details for ICS83905AGLFT
ICS83905AGLFT CAD Models
ICS83905AGLFT Part Data Attributes
|
|
ICS83905AGLFT
Integrated Device Technology Inc
Buy Now
Datasheet
|
Compare Parts:
ICS83905AGLFT
Integrated Device Technology Inc
Clock Generator, 100MHz, PDSO16, 4.40 X 5 MM, 0.92 MM HEIGHT, LEAD FREE, MO-153, TSSOP-16
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | INTEGRATED DEVICE TECHNOLOGY INC | |
| Part Package Code | TSSOP | |
| Package Description | 4.40 X 5 MM, 0.925 MM HEIGHT, ROHS COMPLIANT, MO-153, TSSOP-16 | |
| Pin Count | 16 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 |
Alternate Parts for ICS83905AGLFT
This table gives cross-reference parts and alternative options found for ICS83905AGLFT. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ICS83905AGLFT, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| 83905AGLF | Integrated Device Technology Inc | Check for Price | TSSOP-16, Tube | ICS83905AGLFT vs 83905AGLF |
| ICS83905AGILFT | Integrated Device Technology Inc | Check for Price | Clock Generator, 100MHz, PDSO16, 4.40 X 5 MM, 0.92 MM HEIGHT, LEAD FREE, MO-153, TSSOP-16 | ICS83905AGLFT vs ICS83905AGILFT |
| ICS83905AGILF | Integrated Device Technology Inc | Check for Price | Clock Generator, 100MHz, PDSO16, 4.40 X 5 MM, 0.92 MM HEIGHT, LEAD FREE, MO-153, TSSOP-16 | ICS83905AGLFT vs ICS83905AGILF |
| ICS83905AGIT | Integrated Device Technology Inc | Check for Price | Clock Generator, 100MHz, PDSO16, 4.40 X 5 MM, 0.92 MM HEIGHT, MO-153, TSSOP-16 | ICS83905AGLFT vs ICS83905AGIT |
| ICS83905AGT | Integrated Device Technology Inc | Check for Price | Clock Generator, 100MHz, PDSO16, 4.40 X 3 MM, 0.92 MM HEIGHT, MO-153, TSSOP-16 | ICS83905AGLFT vs ICS83905AGT |
ICS83905AGLFT Frequently Asked Questions (FAQ)
-
A good PCB layout for the ICS83905AGLFT involves keeping the clock input traces short and shielded, using a solid ground plane, and placing decoupling capacitors close to the device. It's also recommended to use a low-impedance power supply and to minimize the distance between the device and the load.
-
To ensure proper power-up and initialization, make sure to follow the recommended power-up sequence, which involves applying power to the VCC pin before the VCCO pin. Also, ensure that the reset pin (RST) is properly connected to a pull-up resistor and capacitor to ensure a clean reset signal.
-
The ICS83905AGLFT has a maximum junction temperature of 150°C. To ensure reliable operation, it's essential to provide adequate heat sinking, such as using a thermal pad or heat sink, and to keep the device away from heat sources. Additionally, ensure good airflow and avoid blocking the airflow around the device.
-
To troubleshoot issues with the ICS83905AGLFT, use an oscilloscope to monitor the clock input and output signals. Check for signal integrity, jitter, and amplitude. Also, verify that the device is properly configured and that the input clock frequency is within the recommended range. Consult the datasheet and application notes for specific troubleshooting guidelines.
-
Yes, the ICS83905AGLFT is a high-frequency device and requires proper EMI/EMC design considerations. Use shielding, grounding, and filtering techniques to minimize electromagnetic interference. Ensure that the device is placed in a shielded area, and use EMI-absorbing materials to reduce radiation. Follow the recommended layout and routing guidelines to minimize radiation and coupling.