-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for ICM7555ESA+ by Analog Devices Inc
Results Overview of ICM7555ESA+ by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (9 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Environmental Monitoring
ICM7555ESA+ Information
ICM7555ESA+ by Analog Devices Inc is an Analog Waveform Generation Function.
Analog Waveform Generation Functions are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for ICM7555ESA+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
700-ICM7555ESA
|
Mouser Electronics | Timers & Support Products Low-Power, General-Purpose Timer RoHS: Compliant | 1510 |
|
$1.8500 / $3.6200 | Buy Now |
|
|
Analog Devices Inc | Low-Power, General-Purpose Tim Package Multiple: 1 | 58206 |
|
$1.9164 / $3.6200 | Buy Now |
Part Details for ICM7555ESA+
ICM7555ESA+ CAD Models
ICM7555ESA+ Part Data Attributes
|
|
ICM7555ESA+
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
ICM7555ESA+
Analog Devices Inc
General-Purpose Timers, 8-SOIC_N-150_MIL, 8 Pins, -40 to 85C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 8-SOIC_N-150_MIL | |
| Package Description | SO-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 8-SOIC_N-150_MIL | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 1999-05-28 | |
| Samacsys Manufacturer | Analog Devices | |
| Analog IC - Other Type | SQUARE | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Frequency-Max | 0.5 MHz | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max (Isup) | 0.12 mA | |
| Supply Voltage-Max (Vsup) | 18 V | |
| Supply Voltage-Min (Vsup) | 2 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.9 mm |
Alternate Parts for ICM7555ESA+
This table gives cross-reference parts and alternative options found for ICM7555ESA+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ICM7555ESA+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ICM7555ESA+T | Maxim Integrated Products | $2.9148 | 1 Func, 0.5MHz, CMOS, PDSO8, SO-8 | ICM7555ESA+ vs ICM7555ESA+T |
| CA0555M96 | Harris Semiconductor | Check for Price | 1 Func, BIPolar, PDSO8 | ICM7555ESA+ vs CA0555M96 |
| ICM7555IBAZ-T | Intersil Corporation | Check for Price | General Purpose Timers; PDIP8, SOIC8; Temp Range: See Datasheet | ICM7555ESA+ vs ICM7555IBAZ-T |
| ICM7555CBA | Harris Semiconductor | Check for Price | 1 Func, 0.1MHz, CMOS, PDSO8 | ICM7555ESA+ vs ICM7555CBA |
| ICM7555IBA | Rochester Electronics LLC | Check for Price | 1 Func, 0.1MHz, PDSO8 | ICM7555ESA+ vs ICM7555IBA |
| ICM7555IBAZ | Intersil Corporation | Check for Price | General Purpose Timers; PDIP8, SOIC8; Temp Range: See Datasheet | ICM7555ESA+ vs ICM7555IBAZ |
| CA0555M96 | Rochester Electronics LLC | Check for Price | 1 Func, PDSO8 | ICM7555ESA+ vs CA0555M96 |
| ICM7555ISA+ | Maxim Integrated Products | Check for Price | 1 Func, 0.5MHz, CMOS, PDSO8, SO-8 | ICM7555ESA+ vs ICM7555ISA+ |
| CA0555M | Rochester Electronics LLC | Check for Price | 1 Func, PDSO8 | ICM7555ESA+ vs CA0555M |
ICM7555ESA+ Frequently Asked Questions (FAQ)
-
The recommended power-on sequence is to apply VCC before applying any input signals. This ensures that the internal biasing and voltage references are established before the device starts operating.
-
Verify that the supply voltage (VCC) is within the recommended range of 2V to 12V, and that the operating temperature is within the range of -40°C to +85°C. Also, ensure that the input signals are within the recommended voltage range and that the output loads are within the specified current limits.
-
The internal ESD protection diodes are designed to protect the device from electrostatic discharge (ESD) events. They help to clamp the input voltages to prevent damage to the internal circuitry.
-
No, the ICM7555ESA+ is not designed to be used as a voltage regulator. It is a timer/oscillator device, and its output is intended to be used as a clock signal or a timing reference, not as a regulated voltage source.
-
The timing period of the ICM7555ESA+ can be calculated using the formula: T = 1.38 * R * C, where T is the timing period, R is the resistance value, and C is the capacitance value. This formula assumes that the device is operating in the astable mode.