Part Details for ICL7106CPL+3 by Maxim Integrated Products
Results Overview of ICL7106CPL+3 by Maxim Integrated Products
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (3 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
ICL7106CPL+3 Information
ICL7106CPL+3 by Maxim Integrated Products is an Analog to Digital Converter.
Analog to Digital Converters are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for ICL7106CPL+3
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Rochester Electronics | ICL7106 A/D Converter RoHS: Compliant Status: Obsolete Min Qty: 1 | 540 |
|
$7.8400 / $9.8000 | Buy Now |
Part Details for ICL7106CPL+3
ICL7106CPL+3 CAD Models
ICL7106CPL+3 Part Data Attributes
|
|
ICL7106CPL+3
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
ICL7106CPL+3
Maxim Integrated Products
A/D Converter, 1 Func, 1 Channel, CMOS, PDIP40, PLASTIC, DIP-40
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | DIP | |
| Package Description | PLASTIC, DIP-40 | |
| Pin Count | 40 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 4 Weeks | |
| Analog Input Voltage-Max | 2 V | |
| Converter Type | A/D CONVERTER | |
| JESD-30 Code | R-PDIP-T40 | |
| JESD-609 Code | e3 | |
| Length | 52.075 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Analog In Channels | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 40 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Bit Code | BINARY | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP40,.6 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 5.08 mm | |
| Supply Voltage-Nom | 9 V | |
| Surface Mount | NO | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 15.24 mm |
Alternate Parts for ICL7106CPL+3
This table gives cross-reference parts and alternative options found for ICL7106CPL+3. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ICL7106CPL+3, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ICL7106CPL-3 | Maxim Integrated Products | Check for Price | A/D Converter, 1 Func, 1 Channel, CMOS, PDIP40, PLASTIC, DIP-40 | ICL7106CPL+3 vs ICL7106CPL-3 |
| ICL7106CPL | Rochester Electronics LLC | Check for Price | ADC, Dual-Slope, 3-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PDIP40, PLASTIC, DIP-40 | ICL7106CPL+3 vs ICL7106CPL |
| ICL7106CPL | General Electric Solid State | Check for Price | A/D Converter, 1 Func, CMOS, PDIP40, | ICL7106CPL+3 vs ICL7106CPL |
ICL7106CPL+3 Frequently Asked Questions (FAQ)
-
The ICL7106CPL+3 can operate from -40°C to +85°C, making it suitable for industrial and commercial applications.
-
To ensure accurate voltage measurement, make sure to use a high-impedance input source, keep the input voltage within the specified range, and avoid noise and interference on the input lines.
-
The ICL7106CPL+3 is designed for low-frequency measurements (up to 100kHz). For high-frequency measurements, consider using a different device or adding external filtering to reduce noise and aliasing.
-
Calibration is not required for the ICL7106CPL+3, as it is a self-calibrating device. However, you may need to adjust the zero and span adjustments for optimal performance in your specific application.
-
Yes, the ICL7106CPL+3 is designed for high-reliability applications, with a low failure rate and high MTBF (mean time between failures). It is also qualified to various industry standards, such as MIL-STD-883 and AEC-Q100.