Part Details for ICB2FL02G by Infineon Technologies AG
Results Overview of ICB2FL02G by Infineon Technologies AG
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
ICB2FL02G Information
ICB2FL02G by Infineon Technologies AG is a Power Management Circuit.
Power Management Circuits are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for ICB2FL02G
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | 179 |
|
$2.0949 / $3.3972 | Buy Now | |
|
|
ComSIT USA | SMART BALLAST CONTROL IC FOR FLUORESCENT LAMP BALLASTS Power Supply Support Circuit, Adjustable, 1 Channel, PDSO19 ECCN: EAR99 RoHS: Compliant |
|
|
RFQ |
Part Details for ICB2FL02G
ICB2FL02G CAD Models
ICB2FL02G Part Data Attributes
|
|
ICB2FL02G
Infineon Technologies AG
Buy Now
Datasheet
|
Compare Parts:
ICB2FL02G
Infineon Technologies AG
Power Supply Support Circuit, Adjustable, 1 Channel, PDSO19, 0.300 INCH, ROHS COMPLIANT, PLASTIC, SOP-20/19
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | INFINEON TECHNOLOGIES AG | |
| Part Package Code | SOIC | |
| Package Description | SOP-20/19 | |
| Pin Count | 20/19 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Additional Feature | IT ALSO HAS VCC=10 to 18V at 125-degree centigrade | |
| Adjustable Threshold | YES | |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT | |
| JESD-30 Code | R-PDSO-G19 | |
| Length | 12.8 mm | |
| Number of Channels | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 19 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -25 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP19/20,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.65 mm | |
| Supply Voltage-Max (Vsup) | 17.5 V | |
| Supply Voltage-Min (Vsup) | 10 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Temperature Grade | OTHER | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Width | 7.6 mm |
Alternate Parts for ICB2FL02G
This table gives cross-reference parts and alternative options found for ICB2FL02G. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ICB2FL02G, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ICB2FL02GXUMA1 | Infineon Technologies AG | Check for Price | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO19, 0.300 INCH, ROHS COMPLIANT, PLASTIC, SOP-20/19 | ICB2FL02G vs ICB2FL02GXUMA1 |
| ICB2FL01GXUMA1 | Infineon Technologies AG | Check for Price | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO19, 0.300 INCH, ROHS COMPLIANT, PLASTIC, SOP-20/19 | ICB2FL02G vs ICB2FL01GXUMA1 |
ICB2FL02G Frequently Asked Questions (FAQ)
-
Infineon recommends a 2-layer or 4-layer PCB with a thermal via array under the device to improve heat dissipation. A minimum of 5 thermal vias with a diameter of 0.3 mm to 0.5 mm is recommended.
-
To ensure reliable operation at high temperatures, it is essential to follow the recommended thermal design and layout guidelines, and to ensure that the device is operated within the specified junction temperature range (TJ) of -40°C to 150°C.
-
The ICB2FL02G is an electrostatic discharge (ESD) sensitive device. Handle the device by the body, avoid touching the pins, and use an ESD wrist strap or mat to prevent damage.
-
The ICB2FL02G is not hermetically sealed, so it's not recommended for use in high-humidity environments. If operation in humid environments is necessary, consider using a conformal coating or potting the device to protect it from moisture.
-
Infineon recommends a soldering profile with a peak temperature of 260°C, a dwell time above 217°C of 30-45 seconds, and a total process time of 60-90 seconds.