Part Details for HRF3205 by Intersil Corporation
Results Overview of HRF3205 by Intersil Corporation
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
HRF3205 Information
HRF3205 by Intersil Corporation is a Power Field-Effect Transistor.
Power Field-Effect Transistors are under the broader part category of Transistors.
A transistor is a small semiconductor device used to amplify, control, or create electrical signals. When selecting a transistor, factors such as voltage, current rating, gain, and power dissipation must be considered, with common types. Read more about Transistors on our Transistors part category page.
Price & Stock for HRF3205
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | TRANSISTOR,MOSFET,N-CHANNEL,55V V(BR)DSS,100A I(D),TO-220AB | 626 |
|
$0.6875 / $1.3750 | Buy Now |
Part Details for HRF3205
HRF3205 CAD Models
HRF3205 Part Data Attributes
|
|
HRF3205
Intersil Corporation
Buy Now
Datasheet
|
Compare Parts:
HRF3205
Intersil Corporation
100A, 55V, 0.008ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220AB
|
| Rohs Code | No | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | INTERSIL CORP | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.29.00.95 | |
| Case Connection | DRAIN | |
| Configuration | SINGLE WITH BUILT-IN DIODE | |
| DS Breakdown Voltage-Min | 55 V | |
| Drain Current-Max (ID) | 100 A | |
| Drain-source On Resistance-Max | 0.008 Ω | |
| FET Technology | METAL-OXIDE SEMICONDUCTOR | |
| JEDEC-95 Code | TO-220AB | |
| JESD-30 Code | R-PSFM-T3 | |
| JESD-609 Code | e0 | |
| Number of Elements | 1 | |
| Number of Terminals | 3 | |
| Operating Mode | ENHANCEMENT MODE | |
| Operating Temperature-Max | 175 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | FLANGE MOUNT | |
| Polarity/Channel Type | N-CHANNEL | |
| Power Dissipation Ambient-Max | 175 W | |
| Power Dissipation-Max (Abs) | 175 W | |
| Pulsed Drain Current-Max (IDM) | 390 A | |
| Qualification Status | Not Qualified | |
| Surface Mount | NO | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Position | SINGLE | |
| Transistor Application | SWITCHING | |
| Transistor Element Material | SILICON |
Alternate Parts for HRF3205
This table gives cross-reference parts and alternative options found for HRF3205. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of HRF3205, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| HRF3205 | Harris Semiconductor | Check for Price | Power Field-Effect Transistor, 100A I(D), 55V, 0.008ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB | HRF3205 vs HRF3205 |
HRF3205 Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the HRF3205 involves keeping the input and output traces as short as possible, using a solid ground plane, and placing bypass capacitors close to the device. A 4-layer PCB with a dedicated power plane and a dedicated ground plane is also recommended.
-
To ensure reliable operation at high temperatures, it is essential to provide adequate heat sinking, use a thermally conductive PCB material, and keep the device within its recommended operating temperature range. Additionally, reducing the power dissipation and using a heat spreader can help to mitigate thermal issues.
-
The HRF3205 is a sensitive device and requires proper ESD protection during handling and assembly. It is recommended to use an ESD wrist strap, ESD mat, and ESD-safe packaging materials to prevent damage from static electricity.
-
Yes, the HRF3205 can be used in switching power supply applications, but it requires careful design consideration to ensure that the device is operated within its safe operating area (SOA). The designer must ensure that the device is not subjected to excessive voltage or current stress, and that the switching frequency is within the recommended range.
-
To troubleshoot common issues with the HRF3205, start by checking the PCB layout and assembly for any errors or defects. Verify that the input voltage and current are within the recommended range, and check for any signs of overheating or thermal stress. Use an oscilloscope to measure the output voltage and current, and consult the datasheet for troubleshooting guidelines.