-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for HMC784MS8GE by Analog Devices Inc
Results Overview of HMC784MS8GE by Analog Devices Inc
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Available)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
HMC784MS8GE Information
HMC784MS8GE by Analog Devices Inc is an RF/Microwave Switch.
RF/Microwave Switches are under the broader part category of RF and Microwave Components.
RF and Microwave Engineering focuses on the design and operation of devices that transmit or receive radio waves. The main distinction between RF and microwave engineering is their wavelength, which influences how energy is transmitted and used in various applications. Read more about RF and Microwave Components on our RF and Microwave part category page.
Price & Stock for HMC784MS8GE
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Peripheral ICs | 1418 |
|
RFQ |
Part Details for HMC784MS8GE
HMC784MS8GE CAD Models
HMC784MS8GE Part Data Attributes
|
|
HMC784MS8GE
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
HMC784MS8GE
Analog Devices Inc
GaAs MMIC 10 W T/R Switch, DC to 4 GHz
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Package Description | MSOP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | HRH-8-1 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| 1dB Compression Point | 35 dBm | |
| Additional Feature | CMOS/TTL COMPATIBLE | |
| Characteristic Impedance | 50 Ω | |
| Construction | COMPONENT | |
| Input Power-Max (CW) | 39 dBm | |
| Insertion Loss-Max | 2 dB | |
| Isolation-Min | 26 dB | |
| JESD-609 Code | e3 | |
| Mounting Feature | SURFACE MOUNT | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| On Time-Nom | 0.04 µs | |
| Operating Frequency-Max | 4000 MHz | |
| Operating Frequency-Min | ||
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Equivalence Code | TSSOP8,.19 | |
| Power Supplies | 5 V | |
| RF/Microwave Device Type | DIVERSITY SWITCH | |
| Surface Mount | YES | |
| Technology | GAAS | |
| Terminal Finish | Matte Tin (Sn) | |
| VSWR-Max | 1.04 |
Alternate Parts for HMC784MS8GE
This table gives cross-reference parts and alternative options found for HMC784MS8GE. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of HMC784MS8GE, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| HMC484MS8GE | Hittite Microwave Corp | Check for Price | Diversity Switch, 0MHz Min, 3000MHz Max, 1 Func, 1.3dB Insertion Loss-Max, GAAS, ROHS COMPLIANT,ULTRA SMALL, PLASTIC, SMT, MSOP-8 | HMC784MS8GE vs HMC484MS8GE |
HMC784MS8GE Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and thermal vias is recommended. Ensure good thermal conductivity by using a thermal pad and a heat sink if necessary.
-
Use the device's power-down mode, reduce the operating frequency, and optimize the voltage regulator module (VRM) design to minimize power consumption.
-
Use controlled impedance traces, minimize trace lengths, and add termination resistors as needed to ensure signal integrity. Also, consider using a signal integrity analysis tool to simulate and optimize the design.
-
Use a shielded enclosure, add EMI filters, and ensure good grounding and shielding of cables and connectors. Also, follow proper PCB layout and routing guidelines to minimize EMI radiation.
-
Use a vector signal analyzer or a spectrum analyzer to measure frequency response, noise figure, and gain. Also, use a signal generator to test the device's input and output impedance.