Part Details for HMC633-SX by Analog Devices Inc
Results Overview of HMC633-SX by Analog Devices Inc
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
HMC633-SX Information
HMC633-SX by Analog Devices Inc is an RF/Microwave Amplifier.
RF/Microwave Amplifiers are under the broader part category of RF and Microwave Components.
RF and Microwave Engineering focuses on the design and operation of devices that transmit or receive radio waves. The main distinction between RF and microwave engineering is their wavelength, which influences how energy is transmitted and used in various applications. Read more about RF and Microwave Components on our RF and Microwave part category page.
Price & Stock for HMC633-SX
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
1127-2639-ND
|
DigiKey | IC RF AMP GPS 5GHZ-17GHZ DIE Min Qty: 2 Lead time: 20 Weeks Container: Tray | Temporarily Out of Stock |
|
$91.9910 / $112.9200 | Buy Now |
|
DISTI #
584-HMC633-SX
|
Mouser Electronics | RF Amplifier Driver amp, 5-17GHz RoHS: Compliant | 4 |
|
$95.4600 / $118.0400 | Buy Now |
|
|
Analog Devices Inc | Driver amp, 5-17GHz Package Multiple: 2 | 6 |
|
$67.2400 / $103.4430 | Buy Now |
|
DISTI #
28995747
|
Verical | RF Amp Single Driver Amp 17GHz 5.5V 7-Pin Die Tray RoHS: Compliant Min Qty: 2 Package Multiple: 2 | Americas - 6 |
|
$84.5786 | Buy Now |
|
DISTI #
HMC633-SX
|
Richardson RFPD | RF & MW DRIVER AMPLIFIER RoHS: Compliant Min Qty: 2 | 0 |
|
$87.9300 / $100.8600 | Buy Now |
Part Details for HMC633-SX
HMC633-SX CAD Models
HMC633-SX Part Data Attributes
|
|
HMC633-SX
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
HMC633-SX
Analog Devices Inc
HMC633-SX
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Pin Count | 0 | |
| Reach Compliance Code | unknown | |
| Samacsys Manufacturer | Analog Devices | |
| RF/Microwave Device Type | WIDE BAND MEDIUM POWER |
HMC633-SX Frequently Asked Questions (FAQ)
-
A good PCB layout is crucial for the HMC633-SX's performance. Analog Devices recommends a 4-layer PCB with a solid ground plane, and the use of vias to connect the top and bottom layers. The device's pins should be connected to the PCB using a low-inductance path, and the power supply lines should be decoupled with capacitors.
-
The HMC633-SX requires a single positive supply voltage (Vcc) between 3.3V and 5V. The device also requires a bias voltage (Vtune) between 1.5V and 3.5V, which is used to tune the device's frequency response. The bias voltage should be connected to the Vtune pin through a resistor (typically 1kΩ) and a capacitor (typically 100nF) to filter out noise.
-
The HMC633-SX is designed to handle a maximum input power of +10 dBm (10 mW). Exceeding this power limit can cause the device to saturate or even be damaged. It's essential to ensure that the input power is within the specified limit to maintain the device's performance and reliability.
-
The HMC633-SX has a serial peripheral interface (SPI) that can be used to control the device's registers and configure its operation. The device's SPI interface operates at a clock frequency of up to 50 MHz, and the interface protocol is compatible with most microcontrollers and FPGAs. The device's datasheet provides detailed information on the SPI interface protocol and register definitions.
-
The HMC633-SX's settling time after a frequency change depends on the frequency step size and the device's bandwidth. Typically, the settling time is around 10-20 μs for a frequency step of 100 MHz. However, this time can be longer for larger frequency steps or when the device is operating at higher frequencies.