Part Details for HFCN-740D+ by Mini-Circuits
Results Overview of HFCN-740D+ by Mini-Circuits
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
HFCN-740D+ Information
HFCN-740D+ by Mini-Circuits is a Ceramic Filter.
Ceramic Filters are under the broader part category of Filters.
A filter is an electronic circuit that selectively allows certain frequencies to pass while attenuating others. They are used to extract desired signals and remove noise. Read more about Filters on our Filters part category page.
Price & Stock for HFCN-740D+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
139-HFCN-740D
|
Mouser Electronics | Signal Conditioning HI PASS FLTR / SURF MT / RoHS RoHS: Compliant | 297 |
|
$2.7400 / $4.3300 | Buy Now |
|
|
Bristol Electronics | Min Qty: 2 | 110 |
|
$1.8295 / $3.9200 | Buy Now |
|
|
Quest Components | 88 |
|
$2.4500 / $5.2500 | Buy Now |
Part Details for HFCN-740D+
HFCN-740D+ CAD Models
HFCN-740D+ Part Data Attributes
|
|
HFCN-740D+
Mini-Circuits
Buy Now
Datasheet
|
Compare Parts:
HFCN-740D+
Mini-Circuits
Ceramic HPF, 7 Section(s) Min, 7 Section(s) Max, 740MHz, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, CASE FV1206, 4 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MINI-CIRCUITS | |
| Package Description | ROHS COMPLIANT, HERMETIC SEALED, CERAMIC, CASE FV1206, 4 PIN | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| Samacsys Manufacturer | Mini-Circuits | |
| Additional Feature | OTHER REEL QTYS ALSO AVAILABLE | |
| Attenuation Frequency (+/- delta f)-Max | 310000 kHz | |
| Attenuation Frequency (+/- delta f)-Min | 190000 kHz | |
| Attenuation@Freq-Max | 40 dB | |
| Attenuation@Freq-Min | 20 dB | |
| Average Input Power | 7 W | |
| Center or Cutoff Frequency (fo/fc) | 740 MHz | |
| Filter Type | CERAMIC HPF | |
| Height | 0.94 mm | |
| Input/Output Impedance | 50 OHM | |
| Insertion Loss-Max | 3 dB | |
| JESD-609 Code | e3 | |
| Length | 3.2 mm | |
| Mounting Type | SURFACE MOUNT | |
| Number of Sections-Max | 7 | |
| Number of Sections-Min | 7 | |
| Number of Terminals | 4 | |
| Operating Temperature-Max | 100 °C | |
| Operating Temperature-Min | -55 °C | |
| Packing Method | TR, 7 INCH | |
| Screening Level | MIL-STD-202 | |
| Terminal Finish | Tin (Sn) - with Nickel (Ni) barrier | |
| VSWR | 1.5 | |
| Width | 1.6 mm |
HFCN-740D+ Frequently Asked Questions (FAQ)
-
Mini-Circuits recommends a microstrip design with a 50-ohm impedance, and a footprint with a 0.5mm pitch and a 1.5mm width. A detailed layout guide is available upon request.
-
The HFCN-740D+ has a thermal pad on the bottom, which should be connected to a thermal ground plane on the PCB. A thermal interface material (TIM) can be used to improve heat transfer. Ensure good airflow and avoid blocking the airflow around the component.
-
Mini-Circuits recommends a soldering profile with a peak temperature of 240°C, a dwell time of 30-60 seconds, and a cooling rate of 4°C/s. Avoid exceeding 260°C to prevent damage to the component.
-
The HFCN-740D+ is not specifically designed for high-reliability or space applications. However, Mini-Circuits offers a space-qualified version, the HFCN-740D+/SQ, which meets the requirements of NASA's ASTM E595 standard.
-
Common issues can be caused by improper PCB layout, poor soldering, or contamination. Check the PCB layout for impedance mismatches, ensure proper soldering, and inspect the component for signs of damage or contamination. Consult the datasheet and application notes for more information.