Part Details for HCPL-0710#500 by Avago Technologies
Results Overview of HCPL-0710#500 by Avago Technologies
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (7 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
HCPL-0710#500 Information
HCPL-0710#500 by Avago Technologies is an Optocoupler.
Optocoupler are under the broader part category of Optoelectronics.
Optoelectronic components work to detect, generate, and control light. They can essentially produce and/or react to light. Read more about Optoelectronics on our Optoelectronics part category page.
Available Datasheets
| Part # | Manufacturer | Description | Datasheet |
|---|---|---|---|
| 8407101RA | Texas Instruments | Octal D-type Edge-Triggered Flip-Flops With 3-State Outputs 20-CDIP -55 to 125 | |
| M38510/07102BFA | Texas Instruments | Dual J-K Negative-Edge-Triggered Flip-Flops With Preset And Clear 16-CFP -55 to 125 | |
| TLV70710PDQNT | Texas Instruments | 200mA Low-Iq Low-Noise Low-Dropout (LDO) Regulator for Portable Devices 4-X2SON -40 to 125 |
Price & Stock for HCPL-0710#500
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 17 |
|
RFQ |
Part Details for HCPL-0710#500
HCPL-0710#500 CAD Models
HCPL-0710#500 Part Data Attributes
|
|
HCPL-0710#500
Avago Technologies
Buy Now
Datasheet
|
Compare Parts:
HCPL-0710#500
Avago Technologies
1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 12.5Mbps, SO-8
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | AVAGO TECHNOLOGIES INC | |
| Package Description | SO-8 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8541.40.80.00 | |
| Samacsys Manufacturer | Avago Technologies | |
| Additional Feature | UL RECOGNIZED | |
| Configuration | SINGLE | |
| Data Rate-Nom | 12.5 MBps | |
| Forward Current-Max | 0.01 A | |
| Isolation Voltage-Max | 3750 V | |
| JESD-609 Code | e0 | |
| Mounting Feature | SURFACE MOUNT | |
| Number of Elements | 1 | |
| Number of Functions | 1 | |
| On-State Current-Max | 0.01 A | |
| Operating Temperature-Max | 100 °C | |
| Operating Temperature-Min | -40 °C | |
| Optoelectronic Device Type | LOGIC IC OUTPUT OPTOCOUPLER | |
| Response Time-Max | 0.001 s | |
| Supply Voltage-Min | 4.5 V | |
| Surface Mount | YES | |
| Terminal Finish | Tin/Lead (Sn/Pb) |
Alternate Parts for HCPL-0710#500
This table gives cross-reference parts and alternative options found for HCPL-0710#500. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of HCPL-0710#500, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| HCPL-0710#500 | Hewlett Packard Co | Check for Price | Logic IC Output Optocoupler, 1-Element, 2500V Isolation, 12MBps, SO-8 | HCPL-0710#500 vs HCPL-0710#500 |
HCPL-0710#500 Frequently Asked Questions (FAQ)
-
Broadcom recommends a PCB layout with a minimum of 10mm creepage distance between the input and output pins, and a maximum of 1nF capacitance between the VCC and GND pins. Additionally, a 0.1uF decoupling capacitor should be placed close to the VCC pin.
-
To ensure reliable operation in high-temperature environments, it is recommended to derate the device's current rating by 1.5mA for every 10°C above 85°C. Additionally, the device should be operated within the recommended operating temperature range of -40°C to 100°C.
-
The maximum allowable voltage on the input pins of HCPL-0710#500 is 30V, with a maximum transient voltage of 40V for a duration of 100ns.
-
While HCPL-0710#500 is designed for high-frequency operation, it is not recommended for use in circuits with switching frequencies above 1MHz. This is because the device's internal capacitance and inductance may cause signal distortion and ringing at higher frequencies.
-
To troubleshoot issues with HCPL-0710#500, start by verifying the device's operating conditions, including the input voltage, output current, and ambient temperature. Check for any signs of physical damage or contamination, and ensure that the device is properly soldered and connected to the PCB. If the issue persists, consult the datasheet and application notes for guidance on troubleshooting and debugging.