Part Details for FUSB1500MHX by onsemi
Results Overview of FUSB1500MHX by onsemi
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Computing and Data Storage
FUSB1500MHX Information
FUSB1500MHX by onsemi is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Part Details for FUSB1500MHX
FUSB1500MHX CAD Models
FUSB1500MHX Part Data Attributes
|
|
FUSB1500MHX
onsemi
Buy Now
Datasheet
|
Compare Parts:
FUSB1500MHX
onsemi
USB2.0 Full-Speed, Low-Speed Transceiver with Charger Detection, WQFN-16, 3000-REEL
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ONSEMI | |
| Part Package Code | WQFN-16 | |
| Package Description | MLP-16 | |
| Manufacturer Package Code | 510CF | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 4 Weeks | |
| Samacsys Manufacturer | onsemi | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| Interface IC Type | LINE TRANSCEIVER | |
| JESD-30 Code | S-PQCC-N16 | |
| JESD-609 Code | e4 | |
| Moisture Sensitivity Level | 1 | |
| Number of Terminals | 16 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 2.5 V | |
| Output Low Current-Max | 0.002 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | QCCN | |
| Package Equivalence Code | LCC16,.12SQ,30/20 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 21 ns | |
| Supply Current-Max | 8 mA | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | 30 |
FUSB1500MHX Frequently Asked Questions (FAQ)
-
A good PCB layout for FUSB1500MHX involves keeping the high-frequency signals (e.g., USB data lines) away from the power and ground planes, using a solid ground plane, and minimizing the length of the traces. It's also recommended to use a common mode filter and to decouple the power supply lines.
-
To ensure EMI compliance, use a shielded cable, keep the USB connector and cable away from other high-frequency components, and use a common mode filter. Additionally, follow the recommended PCB layout and ensure that the device is properly grounded.
-
The maximum cable length supported by FUSB1500MHX is 3 meters (10 feet) for USB 2.0 and 1 meter (3.3 feet) for USB 3.0. However, the actual cable length may vary depending on the specific application and the quality of the cable.
-
FUSB1500MHX is rated for operation up to 85°C (185°F). However, the device's performance and reliability may degrade at higher temperatures. It's recommended to use a heat sink or to implement thermal management techniques to keep the device within its operating temperature range.
-
To troubleshoot issues with FUSB1500MHX, start by checking the power supply voltage, ensuring that the device is properly connected, and verifying that the USB protocol is correctly implemented. Use a logic analyzer or oscilloscope to debug the USB signals and identify any errors or anomalies.