Part Details for FT533GA by Fremont Micro Devices (USA) Inc
Results Overview of FT533GA by Fremont Micro Devices (USA) Inc
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
FT533GA Information
FT533GA by Fremont Micro Devices (USA) Inc is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Part Details for FT533GA
FT533GA CAD Models
FT533GA Part Data Attributes
|
|
FT533GA
Fremont Micro Devices (USA) Inc
Buy Now
Datasheet
|
Compare Parts:
FT533GA
Fremont Micro Devices (USA) Inc
Fixed Positive LDO Regulator, 2.8V, PDSO5, SOT-23, 5 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Contact Manufacturer | |
| Ihs Manufacturer | FREMONT MICRO DEVICES USA INC | |
| Package Description | SSOP, | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Dropout Voltage1-Nom | 0.42 V | |
| Input Voltage-Max | 6 V | |
| Input Voltage-Min | 3.8 V | |
| JESD-30 Code | R-PDSO-G5 | |
| Length | 2.895 mm | |
| Load Regulation-Max | 0.04% | |
| Number of Functions | 1 | |
| Number of Terminals | 5 | |
| Output Current1-Max | 0.4 A | |
| Output Voltage1-Max | 2.856 V | |
| Output Voltage1-Min | 2.744 V | |
| Output Voltage1-Nom | 2.8 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SSOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, SHRINK PITCH | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Surface Mount | YES | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.939 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | |
| Voltage Tolerance-Max | 2% | |
| Width | 1.6 mm |
FT533GA Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a dedicated ground plane and a solid ground pour on the top and bottom layers is recommended. Keep the touch sensors away from noisy signals and ensure a clear return path for the touch signals.
-
Calibration involves adjusting the sensitivity and threshold settings. Perform a self-capacitance calibration by applying a 50% duty cycle, 200 kHz signal to the sensors. Then, adjust the sensitivity and threshold settings based on the application's requirements.
-
The FT533GA supports up to 5 touch points, including gestures and multi-touch functionality.
-
Use the FT533GA's built-in gesture recognition engine, which supports common gestures like tap, double tap, long press, and swipe. Configure the gesture recognition settings using the device's registers.
-
The FT533GA has a typical power consumption of 12 mA in active mode and 2 μA in sleep mode. Power consumption can be optimized by adjusting the sampling rate, sensitivity, and other settings.