Part Details for FT232RQ-R by FTDI Chip
Results Overview of FT232RQ-R by FTDI Chip
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Computing and Data Storage
FT232RQ-R Information
FT232RQ-R by FTDI Chip is a Serial IO/Communication Controller.
Serial IO/Communication Controllers are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Price & Stock for FT232RQ-R
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Peripheral ICs | 432 |
|
RFQ |
Part Details for FT232RQ-R
FT232RQ-R CAD Models
FT232RQ-R Part Data Attributes
|
|
FT232RQ-R
FTDI Chip
Buy Now
Datasheet
|
Compare Parts:
FT232RQ-R
FTDI Chip
Serial I/O Controller, CMOS, PQCC32
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | FUTURE TECHNOLOGY DEVICES INTERNATIONAL LTD | |
| Package Description | QCCN, LCC32,.2SQ,20 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.31.00.01 | |
| Address Bus Width | ||
| Bus Compatibility | USB | |
| Clock Frequency-Max | 12.02 MHz | |
| Drive Interface Standard | RS232; RS422; RS485 | |
| External Data Bus Width | ||
| JESD-30 Code | S-XQCC-N32 | |
| Length | 5 mm | |
| Number of Terminals | 32 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | UNSPECIFIED | |
| Package Code | HVQCCN | |
| Package Equivalence Code | LCC32,.2SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 0.85 mm | |
| Supply Current-Max | 0.1 mA | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Width | 5 mm | |
| uPs/uCs/Peripheral ICs Type | BUS CONTROLLER, UNIVERSAL SERIAL BUS |
Alternate Parts for FT232RQ-R
This table gives cross-reference parts and alternative options found for FT232RQ-R. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of FT232RQ-R, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| FT232RQ | FTDI Chip | Check for Price | USB Bus Controller, CMOS, 5 X 5 MM, GREEN, QFN-32 | FT232RQ-R vs FT232RQ |
FT232RQ-R Frequently Asked Questions (FAQ)
-
The maximum cable length supported by the FT232RQ-R is approximately 3 meters (10 feet) for a standard USB 2.0 connection. However, this can be extended up to 10 meters (33 feet) using active USB repeaters or hubs.
-
Yes, the FT232RQ-R can be powered from a 5V supply, but it's recommended to use a 3.3V supply to ensure compatibility with most USB devices. The device has an internal 3.3V regulator, so a 5V supply will be regulated down to 3.3V internally.
-
To configure the FT232RQ-R for RS-485 mode, you need to set the UART mode to 'RS-485' using the FTDI Chip's configuration utility, such as the FT_Prog tool. You may also need to add an external RS-485 transceiver and configure the transmit and receive pins accordingly.
-
Yes, the FT232RQ-R can be used with a microcontroller that only has a 3-wire UART interface. The device has an internal flow control mechanism that can be configured to use RTS/CTS or XON/XOFF flow control, allowing it to work with 3-wire UART interfaces.
-
The FT232RQ-R supports baud rates up to 3 Mbps (3000000 bps). However, the actual achievable baud rate may be limited by the quality of the USB connection, the host system, and the device being connected to.