Part Details for FCLF8522P2BTL by Finisar Corporation
Results Overview of FCLF8522P2BTL by Finisar Corporation
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
FCLF8522P2BTL Information
FCLF8522P2BTL by Finisar Corporation is a Fiber Optic Transceiver.
Fiber Optic Transceivers are under the broader part category of Fiber Optics.
Fiber optics are thin glass strands used to transmit light signals over long distances, enabling high-speed data transfer. There are two main types—single mode and multimode fibers. Read more about Fiber Optics on our Fiber Optics part category page.
Price & Stock for FCLF8522P2BTL
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | TRANSCEIVER, 1250MBPS(TX), 1250MBPS(RX), SFP CONNECTOR | 1 |
|
$46.3060 | Buy Now |
|
|
NAC | RoHS: Compliant Min Qty: 1 Package Multiple: 1 | 0 |
|
RFQ | |
|
|
Vyrian | Fiber Optics | 96 |
|
RFQ |
Part Details for FCLF8522P2BTL
FCLF8522P2BTL CAD Models
FCLF8522P2BTL Part Data Attributes
|
|
FCLF8522P2BTL
Finisar Corporation
Buy Now
Datasheet
|
Compare Parts:
FCLF8522P2BTL
Finisar Corporation
Transceiver, 1250Mbps(Tx), 1250Mbps(Rx), SFP Connector, ROHS COMPLIANT PACKAGE
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | FINISAR CORP | |
| Package Description | ROHS COMPLIANT PACKAGE | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | Finisar | |
| Body Breadth | 13.27 mm | |
| Body Height | 8.46 mm | |
| Body Length or Diameter | 47.7 mm | |
| Connection Type | SFP CONNECTOR | |
| Data Rate (Rx) | 1250 Mbps | |
| Data Rate (Tx) | 1250 Mbps | |
| Fiber Optic Device Type | TRANSCEIVER | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Supply Voltage-Max | 3.47 V | |
| Supply Voltage-Min | 3.13 V | |
| Supply Voltage-Nom | 3.3 V |
Alternate Parts for FCLF8522P2BTL
This table gives cross-reference parts and alternative options found for FCLF8522P2BTL. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of FCLF8522P2BTL, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| FCLF8521P2BTL | Coherent Thermal Solutions | Check for Price | Transceiver, 1250Mbps(Tx), 1250Mbps(Rx), SFP Connector, ROHS COMPLIANT PACKAGE | FCLF8522P2BTL vs FCLF8521P2BTL |
| FCLF8522P2BTL | Coherent Inc | Check for Price | Transceiver, 1250Mbps(Tx), 1250Mbps(Rx), SFP Connector, ROHS COMPLIANT PACKAGE | FCLF8522P2BTL vs FCLF8522P2BTL |
| FCLF-8521-3 | Finisar Corporation | Check for Price | Transceiver, 1250Mbps(Tx), 1250Mbps(Rx), Panel Mount, | FCLF8522P2BTL vs FCLF-8521-3 |
FCLF8522P2BTL Frequently Asked Questions (FAQ)
-
Finisar recommends a 4-layer PCB with a solid ground plane, and a microstrip transmission line design to minimize signal reflections and ensure optimal signal integrity.
-
Finisar recommends attaching a heat sink to the module, and ensuring good airflow around the module to keep the temperature within the recommended operating range.
-
The maximum cable length supported by the FCLF8522P2BTL is 10km, assuming a standard single-mode fiber optic cable with a attenuation of 0.2 dB/km.
-
The FCLF8522P2BTL is designed to operate in a commercial temperature range of 0°C to 70°C, but it can be customized for industrial temperature range of -40°C to 85°C with special screening and testing.
-
The FCLF8522P2BTL is classified as a Class 1 laser product, which means it is safe for use in normal operating conditions, but may cause eye damage if viewed directly with optical instruments.