Part Details for FAN4274IMU8X by Fairchild Semiconductor Corporation
Results Overview of FAN4274IMU8X by Fairchild Semiconductor Corporation
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
FAN4274IMU8X Information
FAN4274IMU8X by Fairchild Semiconductor Corporation is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for FAN4274IMU8X
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Amplifiers | 4482 |
|
RFQ | |
|
|
Win Source Electronics | Op Amp Dual Ultra Low Cost Amplifier R-R I/O 5.25V 8-Pin Micro T/R / IC OPAMP VFB 3.7MHZ RRO 8MSOP | 60016 |
|
$0.3169 / $0.4091 | Buy Now |
Part Details for FAN4274IMU8X
FAN4274IMU8X CAD Models
FAN4274IMU8X Part Data Attributes
|
|
FAN4274IMU8X
Fairchild Semiconductor Corporation
Buy Now
Datasheet
|
Compare Parts:
FAN4274IMU8X
Fairchild Semiconductor Corporation
Operational Amplifier, 1 Func, 6000uV Offset-Max, CMOS, PDSO8, ROHS COMPLIANT, MO-187, MSOP-8
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | FAIRCHILD SEMICONDUCTOR CORP | |
| Part Package Code | MSOP | |
| Package Description | ROHS COMPLIANT, MO-187, MSOP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 8LD, MSOP, JEDEC MO-187, 3.0MM WIDE | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Common-mode Reject Ratio-Nom | 65 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 6000 µV | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e4 | |
| Length | 3 mm | |
| Low-Bias | YES | |
| Low-Offset | NO | |
| Micropower | YES | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TAPE AND REEL | |
| Peak Reflow Temperature (Cel) | 240 | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Slew Rate-Nom | 3 V/us | |
| Supply Current-Max | 0.6 mA | |
| Supply Voltage Limit-Max | 6 V | |
| Supply Voltage-Nom (Vsup) | 2.7 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 4000 | |
| Wideband | NO | |
| Width | 3 mm |
Alternate Parts for FAN4274IMU8X
This table gives cross-reference parts and alternative options found for FAN4274IMU8X. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of FAN4274IMU8X, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| FAN4274IMU8X | onsemi | Check for Price | Operational Amplifier, Rail-to-Rail I/O, 3.7Mhz, CMOS Op-Amp, Micro8, 4000-REEL | FAN4274IMU8X vs FAN4274IMU8X |
FAN4274IMU8X Frequently Asked Questions (FAQ)
-
A good PCB layout for optimal thermal performance involves placing the device near a thermal pad or a heat sink, and ensuring good thermal conductivity between the device and the heat sink. The datasheet provides some guidelines, but a more detailed application note or a thermal simulation may be necessary for optimal design.
-
To ensure reliable operation at high temperatures, it's essential to follow the recommended operating conditions, including the maximum junction temperature (Tj) of 150°C. Additionally, consider using a heat sink, ensuring good thermal conductivity, and avoiding thermal hotspots. It's also crucial to follow proper PCB design and layout guidelines.
-
The current limit of the FAN4274IMU8X (typically 1.5A) affects the maximum load current and power dissipation. Ensure that your system design takes into account the current limit to avoid overheating, and consider using current limiting resistors or other protection mechanisms if necessary.
-
The FAN4274IMU8X has built-in ESD protection, but it's still essential to follow proper handling and storage procedures to prevent ESD damage. Use ESD-safe materials, handle the device by the body or pins, and avoid touching the pins or leads. For added protection, consider using ESD protection devices or diodes in your system design.
-
The quiescent current of the FAN4274IMU8X (typically 2.5mA) affects the overall power consumption of your system. Consider the quiescent current when designing your system's power budget, and optimize your design to minimize power consumption during idle or standby modes.