Part Details for F4804A by Bel Power Solutions
Results Overview of F4804A by Bel Power Solutions
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
F4804A Information
F4804A by Bel Power Solutions is a Data Line Filter.
Data Line Filters are under the broader part category of Filters.
A filter is an electronic circuit that selectively allows certain frequencies to pass while attenuating others. They are used to extract desired signals and remove noise. Read more about Filters on our Filters part category page.
Price & Stock for F4804A
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | DC-DC CONV INP FILTER 4A SMD | 2 |
|
$14.8400 | Buy Now |
Part Details for F4804A
F4804A CAD Models
F4804A Part Data Attributes
|
|
F4804A
Bel Power Solutions
Buy Now
Datasheet
|
Compare Parts:
F4804A
Bel Power Solutions
Data Line Filter Module
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | POWER-ONE INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8504.50.80.00 | |
| Filter Type | DATA LINE FILTER MODULE | |
| Height | 6.78 mm | |
| JESD-609 Code | e4 | |
| Length | 25.4 mm | |
| Mounting Type | SURFACE MOUNT | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Terminal Finish | Gold (Au) - with Nickel (Ni) barrier |
F4804A Frequently Asked Questions (FAQ)
-
Bel Power Solutions recommends a PCB layout with a solid copper plane underneath the module, and a minimum of 2 oz copper thickness to ensure good thermal conductivity. Additionally, a gap of at least 1 mm between the module and any surrounding components is recommended to allow for airflow and heat dissipation.
-
To ensure reliable start-up in high-temperature environments, Bel Power Solutions recommends using a soft-start circuit or a ramp-up circuit to limit the inrush current during start-up. This can help prevent overheating and ensure reliable operation.
-
The maximum allowed capacitance on the output of the F4804A is 2200 uF. Exceeding this value can cause instability and affect the converter's performance.
-
Yes, the F4804A can be used in a redundant configuration to achieve high reliability. Bel Power Solutions recommends using a diode ORing circuit or an active ORing circuit to ensure that the output voltage is maintained even in the event of a failure.
-
Bel Power Solutions recommends using a fuse with a rating of 5-10 A, depending on the specific application and input voltage. The fuse should be able to handle the maximum input current of the converter during start-up and normal operation.