Part Details for ECS-96SMF21A15 by ECS International Inc
Results Overview of ECS-96SMF21A15 by ECS International Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
ECS-96SMF21A15 Information
ECS-96SMF21A15 by ECS International Inc is a Crystal Filter.
Crystal Filters are under the broader part category of Filters.
A filter is an electronic circuit that selectively allows certain frequencies to pass while attenuating others. They are used to extract desired signals and remove noise. Read more about Filters on our Filters part category page.
Price & Stock for ECS-96SMF21A15
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
X713CT-ND
|
DigiKey | MONO XTAL 21.4MHZ 2P 2DB SMD Min Qty: 1 Lead time: 21 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
658 In Stock |
|
$2.9375 / $5.6300 | Buy Now |
|
|
Quest Components | 284 |
|
$2.9900 / $6.9000 | Buy Now |
Part Details for ECS-96SMF21A15
ECS-96SMF21A15 CAD Models
ECS-96SMF21A15 Part Data Attributes
|
|
ECS-96SMF21A15
ECS International Inc
Buy Now
Datasheet
|
Compare Parts:
ECS-96SMF21A15
ECS International Inc
Crystal Filter, 1 Function(s), 21.4MHz, 7.5kHz BW(delta f), Monolithic, ROHS COMPLIANT,SMD, 6 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ECS INC INTERNATIONAL | |
| Package Description | ROHS COMPLIANT,SMD, 6 PIN | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | ECS | |
| Additional Feature | 2 POLE; TAPE AND REEL | |
| Band Width (+/- delta f) | 7.5 kHz | |
| Center or Cutoff Frequency (fo/fc) | 21.4 MHz | |
| Construction | MONOLITHIC | |
| Filter Type | CRYSTAL FILTER | |
| Height | 1.35 mm | |
| Input/Output Impedance | 1500 OHM//2.5 | |
| Insertion Loss-Max | 2.5 dB | |
| Length | 7 mm | |
| Mounting Type | SURFACE MOUNT | |
| Number of Functions | 1 | |
| Number of Terminals | 6 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -30 °C | |
| Package Material | CERAMIC | |
| Width | 5 mm |
ECS-96SMF21A15 Frequently Asked Questions (FAQ)
-
The recommended operating temperature range for the ECS-96SMF21A15 is -40°C to 85°C, as specified in the datasheet. However, it's essential to note that the module's performance and reliability may degrade if operated outside this range for extended periods.
-
While the ECS-96SMF21A15 is designed to operate in a variety of environments, it's not recommended to use it in extremely humid conditions (above 80% RH) without proper protection. Moisture can seep into the module and cause damage or corrosion. If you must operate in a humid environment, consider using a conformal coating or sealing the module in a protective enclosure.
-
The maximum power consumption of the ECS-96SMF21A15 is not explicitly stated in the datasheet. However, based on the module's specifications, the maximum power consumption can be estimated to be around 2.5W (typical) to 3.5W (maximum) when operating at 3.3V and 1.8V supply voltages. It's essential to ensure your power supply can provide the required power to the module.
-
No, the ECS-96SMF21A15 is not designed to operate with a 5V power supply. The recommended power supply voltages are 3.3V and 1.8V, as specified in the datasheet. Using a 5V power supply may damage the module or cause it to malfunction.
-
The typical latency of the ECS-96SMF21A15 is not explicitly stated in the datasheet. However, based on the module's architecture and specifications, the typical latency can be estimated to be around 100-200 ns (nanoseconds) for read and write operations.