Part Details for E101SD1V31GE by C&K
Results Overview of E101SD1V31GE by C&K
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
E101SD1V31GE Information
E101SD1V31GE by C&K is a Toggle Switch.
Toggle Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for E101SD1V31GE
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
000000000005185779
|
Sager | Toggle Switches SP ON-NONE-ON SNAP VBRKT | 0 |
|
Buy Now |
Part Details for E101SD1V31GE
E101SD1V31GE CAD Models
E101SD1V31GE Part Data Attributes
|
|
E101SD1V31GE
C&K
Buy Now
Datasheet
|
Compare Parts:
E101SD1V31GE
C&K
Toggle Switch, SPDT, On-on, 7.5A, 28VDC, 7 PCB Hole Cnt, Solder Terminal, Toggle Actuator, Through Hole-straight
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | C & K COMPONENTS LLC | |
| Reach Compliance Code | not_compliant | |
| Actuator Angle | 25 deg | |
| Actuator Length | 0.5 inch | |
| Actuator Material | BRASS | |
| Actuator Type | TOGGLE | |
| Body Breadth | 8.128 mm | |
| Body Height | 11.684 mm | |
| Body Length or Diameter | 15.748 mm | |
| Bushing Diameter | 0.255 inch | |
| Bushing Length | 0.25 inch | |
| Bushing Type | UNTHREADED | |
| Center Contact Material | COPPER ALLOY | |
| Center Contact Plating | GOLD OVER NICKEL | |
| Contact (AC) Max Rating R Load | 3A@250VAC | |
| Contact Current(AC)-Max | 3 A | |
| Contact Current(DC)-Max | 7.5 A | |
| Contact (DC) Max Rating R Load | 7.5A@28VDC | |
| Contact Function | ON-ON | |
| Contact Resistance | 0.01 mΩ | |
| Contact Voltage(AC)-Max | 250 V | |
| Contact Voltage(DC)-Max | 28 V | |
| Dielectric Withstand Volts | 1400VAC V | |
| Electrical Life | 40000 Cycle(s) | |
| End Contact Material | COIN SILVER | |
| End Contact Plating | SILVER | |
| Illumination | NON-ILLUMINATED | |
| Insulation Resistance | 1000000000 Ω | |
| Insulator Material | GLASS FILLED NYLON | |
| JESD-609 Code | e4 | |
| Mounting Feature | THROUGH HOLE-STRAIGHT | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -30 °C | |
| PCB Hole Count | 7 | |
| Sealing | EPOXY | |
| Solderability | MIL-STD | |
| Surface Mount | NO | |
| Switch Action | LATCHED | |
| Switch Function | SPDT | |
| Switch Type | TOGGLE SWITCH | |
| Terminal Finish | GOLD OVER NICKEL | |
| Terminal Length | 0.13 inch | |
| Terminal Material | COPPER ALLOY | |
| Termination Type | SOLDER |
Alternate Parts for E101SD1V31GE
This table gives cross-reference parts and alternative options found for E101SD1V31GE. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of E101SD1V31GE, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| E101SD1V6GE | C&K | Check for Price | TOGGLE SWITCH,STRAIGHT,SPDT,ON-ON,PC TAIL TERMINAL,TOGGLE,7 | E101SD1V31GE vs E101SD1V6GE |