-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for DS90CR288MTD by Texas Instruments
Results Overview of DS90CR288MTD by Texas Instruments
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
DS90CR288MTD Information
DS90CR288MTD by Texas Instruments is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Part Details for DS90CR288MTD
DS90CR288MTD CAD Models
DS90CR288MTD Part Data Attributes
|
|
DS90CR288MTD
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
DS90CR288MTD
Texas Instruments
LINE RECEIVER, PDSO56, TSSOP-56
|
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | TSSOP | |
| Package Description | TSSOP-56 | |
| Pin Count | 56 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Input Characteristics | DIFFERENTIAL | |
| Interface IC Type | LINE RECEIVER | |
| Interface Standard | EIA-644; TIA-644 | |
| JESD-30 Code | R-PDSO-G56 | |
| Length | 14 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 56 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | -10 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP56,.3,20 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Receiver Number of Bits | 28 | |
| Seated Height-Max | 1.1 mm | |
| Supply Voltage-Max | 3.6 V | |
| Supply Voltage-Min | 3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Temperature Grade | COMMERCIAL | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | DUAL | |
| Width | 6.1 mm |
Alternate Parts for DS90CR288MTD
This table gives cross-reference parts and alternative options found for DS90CR288MTD. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DS90CR288MTD, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DS90CR288MTDX | Rochester Electronics LLC | Check for Price | 5 LINE RECEIVER, PDSO56, TSSOP-56 | DS90CR288MTD vs DS90CR288MTDX |
| DS90CR288AMTD | Texas Instruments | Check for Price | +3.3V Rising Edge Data Strobe LVDS 28-Bit Channel Link Receiver - 85 MHz 56-TSSOP -10 to 70 | DS90CR288MTD vs DS90CR288AMTD |
DS90CR288MTD Frequently Asked Questions (FAQ)
-
Texas Instruments provides a recommended PCB layout guide in the DS90CR288MTD Evaluation Module User's Guide (SLUUAC5). It includes guidelines for component placement, routing, and thermal management to ensure optimal performance and signal integrity.
-
The DS90CR288MTD can be configured using the TI's Serializer/Deserializer Configuration Tool (SDCT) software. This tool allows users to customize the device's settings, such as data rate, clock frequency, and output format, to suit their specific application requirements.
-
The maximum cable length supported by the DS90CR288MTD depends on the specific application and the type of cable used. However, as a general guideline, TI recommends a maximum cable length of 10 meters for FPD-Link III applications and 15 meters for OpenLDI applications.
-
TI provides a troubleshooting guide in the DS90CR288MTD datasheet (SLAS964) that covers common issues and their solutions. Additionally, users can use TI's Serializer/Deserializer Debug Tool (SDDT) software to debug and analyze the device's operation.
-
Yes, the DS90CR288MTD is compatible with other FPD-Link III devices from Texas Instruments. It is designed to be backward compatible with previous generations of FPD-Link III devices, ensuring seamless integration and interoperability.