Part Details for DS80C320+MCG by Maxim Integrated Products
Results Overview of DS80C320+MCG by Maxim Integrated Products
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Transportation and Logistics
Renewable Energy
Automotive
Robotics and Drones
DS80C320+MCG Information
DS80C320+MCG by Maxim Integrated Products is a Microcontroller.
Microcontrollers are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Price & Stock for DS80C320+MCG
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Peripheral ICs | 1018 |
|
RFQ |
Part Details for DS80C320+MCG
DS80C320+MCG CAD Models
DS80C320+MCG Part Data Attributes
|
|
DS80C320+MCG
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
DS80C320+MCG
Maxim Integrated Products
Microcontroller, 8-Bit, MROM, 8051 CPU, 25MHz, CMOS, PDIP40, 0.600 INCH, ROHS COMPLIANT, PLASTIC, DIP-40
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | DIP | |
| Package Description | 0.600 INCH, ROHS COMPLIANT, PLASTIC, DIP-40 | |
| Pin Count | 40 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.31.00.01 | |
| Has ADC | NO | |
| Address Bus Width | 16 | |
| Bit Size | 8 | |
| CPU Family | 8051 | |
| Clock Frequency-Max | 25 MHz | |
| DAC Channels | NO | |
| DMA Channels | NO | |
| External Data Bus Width | 8 | |
| JESD-30 Code | R-PDIP-T40 | |
| JESD-609 Code | e3 | |
| Length | 52.075 mm | |
| Number of I/O Lines | 32 | |
| Number of Terminals | 40 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| PWM Channels | NO | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP40,.6 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| RAM (bytes) | 256 | |
| ROM Programmability | MROM | |
| Seated Height-Max | 5.08 mm | |
| Speed | 25 MHz | |
| Supply Current-Max | 45 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | NO | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Width | 15.24 mm | |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
DS80C320+MCG Frequently Asked Questions (FAQ)
-
The recommended power-up sequence is to apply VCC first, followed by VDD, and then the clock signal. This ensures proper initialization of the device.
-
The clock source can be configured using the Clock Control Register (CCR). The CCR allows selection of the clock source, clock frequency, and clock mode. Refer to the datasheet for specific register settings.
-
The maximum clock frequency supported by the DS80C320+MCG is 40 MHz. However, the actual clock frequency may be limited by the specific application and system requirements.
-
A reset circuit can be implemented using an external resistor and capacitor connected to the RESET pin. The reset circuit should be designed to provide a minimum reset pulse width of 10 ns.
-
The MCG interface is a high-speed interface that allows the DS80C320+MCG to communicate with other devices at speeds up to 3.2 Gbps. It is typically used for high-speed data transfer applications such as video or data transmission.