-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for DS75176BTMX by Texas Instruments
Results Overview of DS75176BTMX by Texas Instruments
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (10 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Renewable Energy
Robotics and Drones
DS75176BTMX Information
DS75176BTMX by Texas Instruments is a Line Driver or Receiver.
Line Driver or Receivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for DS75176BTMX
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Win Source Electronics | IC TXRX MULTIPOINT 8-SOIC / Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC T/R | 25 |
|
$4.1709 / $6.2562 | Buy Now |
Part Details for DS75176BTMX
DS75176BTMX CAD Models
DS75176BTMX Part Data Attributes
|
|
DS75176BTMX
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
DS75176BTMX
Texas Instruments
Multipoint RS-485/RS-422 Transceivers 8-SOIC -40 to 85
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | SOIC | |
| Package Description | SOIC-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Additional Feature | COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER | |
| Differential Output | YES | |
| Driver Number of Bits | 1 | |
| High Level Input Current-Max | 0.00002 A | |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER | |
| Interface IC Type | LINE TRANSCEIVER | |
| Interface Standard | EIA-485; EIA-422 | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e0 | |
| Length | 4.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Out Swing-Min | 1.5 V | |
| Output Low Current-Max | 0.016 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 235 | |
| Qualification Status | Not Qualified | |
| Receive Delay-Max | 37 ns | |
| Receiver Number of Bits | 1 | |
| Seated Height-Max | 1.75 mm | |
| Supply Current-Max | 55 mA | |
| Supply Voltage-Max | 5.25 V | |
| Supply Voltage-Min | 4.75 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 20 | |
| Transmit Delay-Max | 22 ns | |
| Width | 3.9 mm |
Alternate Parts for DS75176BTMX
This table gives cross-reference parts and alternative options found for DS75176BTMX. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DS75176BTMX, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ADM485JRZ-REEL | Analog Devices Inc | $2.4275 | 5 V, Low Power, 5 Mbps, Half Duplex EIA RS-485 Transceiver | DS75176BTMX vs ADM485JRZ-REEL |
| MAX485EESA | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, 0.150 INCH, MS-012A, SOIC-8 | DS75176BTMX vs MAX485EESA |
| MAX485CSA+T | Analog Devices Inc | $1.4381 | Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C | DS75176BTMX vs MAX485CSA+T |
| ADM1485ARZ | Analog Devices Inc | $3.2751 | 5 V, High Speed (30 Mbps), Low Power, Half Duplex EIA RS-485 Transceiver | DS75176BTMX vs ADM1485ARZ |
| MAX485CSA-T | Maxim Integrated Products | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8, SOIC-8 | DS75176BTMX vs MAX485CSA-T |
| MAX1487ECSA+ | Analog Devices Inc | $3.1404 | ±15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers, 8-SOIC_N-150_MIL, 8 Pins, 0 to 70C | DS75176BTMX vs MAX1487ECSA+ |
| LTC485IS8 | Analog Devices Inc | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 | DS75176BTMX vs LTC485IS8 |
| TL3695DR | Texas Instruments | $1.0193 | Differential Bus Transceiver 8-SOIC 0 to 70 | DS75176BTMX vs TL3695DR |
| ADM485JRZ | Analog Devices Inc | $1.7449 | 5 V, Low Power, 5 Mbps, Half Duplex EIA RS-485 Transceiver | DS75176BTMX vs ADM485JRZ |
| LTC1485CS8#TR | Analog Devices Inc | Check for Price | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8 | DS75176BTMX vs LTC1485CS8#TR |
DS75176BTMX Frequently Asked Questions (FAQ)
-
TI recommends a 2-layer or 4-layer PCB with a solid ground plane on the bottom layer, and a thermal relief pattern on the top layer to minimize thermal resistance.
-
Ensure proper thermal management, use a heat sink if necessary, and follow the recommended operating conditions and derating guidelines in the datasheet.
-
Use a shielded enclosure, keep signal traces short and away from the device, use a common-mode choke, and follow good PCB layout practices to minimize radiation.
-
Check the oscillator circuit for proper component values, ensure the crystal is properly connected, and verify the oscillator enable pin is properly configured.
-
Using a different crystal frequency may affect the device's accuracy, stability, and overall performance. Consult the datasheet and TI's application notes for guidance.