Part Details for DS60R+T&R by Maxim Integrated Products
Results Overview of DS60R+T&R by Maxim Integrated Products
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (7 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
DS60R+T&R Information
DS60R+T&R by Maxim Integrated Products is a Temperature Sensor.
Temperature Sensors are under the broader part category of Sensors/Transducers.
Sensors and transducers detect and measure physical quantities like temperature, pressure, and force, converting them into electrical signals for various applications. Read more about Sensors/Transducers on our Sensors/Transducers part category page.
Price & Stock for DS60R+T&R
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
175-DS60R+T&RCT-ND
|
DigiKey | SENSOR ANALOG -40C-125C SOT23-3 Min Qty: 1 Lead time: 10 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
4717 In Stock |
|
$1.8721 / $2.9800 | Buy Now |
Part Details for DS60R+T&R
DS60R+T&R CAD Models
DS60R+T&R Part Data Attributes
|
|
DS60R+T&R
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
DS60R+T&R
Maxim Integrated Products
Analog Voltage Output Sensor, 0.17V Min, 1.2V Max, 2Cel, CMOS, Rectangular, 3 Pin, Surface Mount, LEAD FREE, SOT-23, 3 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Package Description | LEAD FREE, SOT-23, 3 PIN | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Accuracy-Max (Cel) | 2 Cel | |
| Body Breadth | 1.27 mm | |
| Body Height | 0.88 mm | |
| Body Length or Diameter | 2.79 mm | |
| Housing | PLASTIC | |
| JESD-609 Code | e3 | |
| Linearity (Cel) | 0.8 Cel | |
| Mounting Feature | SURFACE MOUNT | |
| Number of Terminals | 3 | |
| Operating Current-Max | 0.12 mA | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Voltage-Max | 1.2 V | |
| Output Voltage-Min | 0.17 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Equivalence Code | TO-236 | |
| Package Shape/Style | RECTANGULAR | |
| Sensors/Transducers Type | TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Coefficient | POSITIVE ppm/°C | |
| Terminal Finish | MATTE TIN | |
| Termination Type | SOLDER |
Alternate Parts for DS60R+T&R
This table gives cross-reference parts and alternative options found for DS60R+T&R. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DS60R+T&R, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DS60R/T&R | Maxim Integrated Products | Check for Price | Analog Voltage Output Sensor, 0.17V Min, 1.2V Max, 2Cel, CMOS, Rectangular, 3 Pin, Surface Mount, SOT-23, 3 PIN | DS60R+T&R vs DS60R/T&R |
DS60R+T&R Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a 10uF capacitor between VCC and GND, and a 100nF capacitor between VCC and AVCC.
-
Use a thermocouple or a thermistor with a high accuracy rating. Ensure good thermal contact between the sensor and the device under test. Use a low-pass filter to remove noise from the temperature signal. Calibrate the temperature measurement system using a known temperature reference.
-
The maximum cable length for the digital interface is 10 meters (33 feet) for a reliable data transfer rate of 100 kHz. However, this can be extended up to 100 meters (330 feet) using a repeater or an active cable extender.
-
Check the power supply voltage and ensure it is within the recommended range. Verify the clock frequency and ensure it is within the specified range. Check the data transmission rate and ensure it is within the specified range. Use a logic analyzer or oscilloscope to verify the digital signal integrity.
-
Power up the device in the following sequence: VCC, AVCC, and then the digital interface. Ensure that the power supply voltage is stable and within the recommended range before applying the clock signal.