Part Details for DS3150QN+ by Maxim Integrated Products
Results Overview of DS3150QN+ by Maxim Integrated Products
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
DS3150QN+ Information
DS3150QN+ by Maxim Integrated Products is a Digital Transmission Interface.
Digital Transmission Interfaces are under the broader part category of Telecommunication Circuits.
A telecommunications circuit transmits and receives information between points. Key components include transmitters, receivers, amplifiers, and multiplexers. Read more about Telecommunication Circuits on our Telecommunication Circuits part category page.
Price & Stock for DS3150QN+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | 35 |
|
$29.2808 / $34.4480 | Buy Now |
Part Details for DS3150QN+
DS3150QN+ CAD Models
DS3150QN+ Part Data Attributes
|
|
DS3150QN+
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
DS3150QN+
Maxim Integrated Products
PCM Transceiver, 1-Func, PQCC28, ROHS COMPLIANT, PLASTIC, LCC-28
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | QLCC | |
| Package Description | QCCJ, LDCC28,.5SQ | |
| Pin Count | 28 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| JESD-30 Code | S-PQCC-J28 | |
| JESD-609 Code | e3 | |
| Length | 11.505 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 28 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | QCCJ | |
| Package Equivalence Code | LDCC28,.5SQ | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER | |
| Peak Reflow Temperature (Cel) | 245 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 4.57 mm | |
| Supply Current-Max | 0.11 mA | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Telecom IC Type | PCM TRANSCEIVER | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | J BEND | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | QUAD | |
| Width | 11.505 mm |
Alternate Parts for DS3150QN+
This table gives cross-reference parts and alternative options found for DS3150QN+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DS3150QN+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DS3150Q+ | Maxim Integrated Products | Check for Price | PCM Transceiver, 1-Func, PQCC28, ROHS COMPLIANT, PLASTIC, LCC-28 | DS3150QN+ vs DS3150Q+ |
| DS3150Q/T&R | Maxim Integrated Products | Check for Price | PCM Transceiver, 1-Func, PQCC28, PLASTIC, LCC-28 | DS3150QN+ vs DS3150Q/T&R |
DS3150QN+ Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital sections separate, and use a common ground point for the analog and digital grounds. Use a 0.1uF decoupling capacitor between VCC and GND, and a 10uF capacitor between VCC and GND for each power pin.
-
Use a high-quality, low-ESR capacitor (e.g., 10uF ceramic) between VCC and GND, and a 0.1uF decoupling capacitor between VCC and GND for each power pin. Ensure the power supply is stable and has low ripple. Use a separate power plane for the DS3150QN+ and keep it away from noisy digital signals.
-
The recommended clock frequency is 25MHz, but it can operate up to 50MHz. The clock signal should have a duty cycle of 40-60% and a rise/fall time of <5ns. Use a clock signal with low jitter (<100ps) and ensure it is properly terminated to prevent reflections.
-
Use the power-down mode (PD pin) to reduce power consumption when the device is not in use. Optimize the clock frequency and voltage supply to minimize power consumption. Use a low-power mode (e.g., standby mode) when possible, and consider using a dynamic voltage and frequency scaling (DVFS) technique.
-
The DS3150QN+ has a maximum junction temperature of 150°C. Ensure good airflow around the device, and use a heat sink or thermal pad if necessary. Avoid overheating the device, as it can affect its performance and lifespan.