Part Details for DS2502P-E64 by Maxim Integrated Products
Results Overview of DS2502P-E64 by Maxim Integrated Products
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Education and Research
Security and Surveillance
Financial Technology (Fintech)
Computing and Data Storage
Energy and Power Systems
DS2502P-E64 Information
DS2502P-E64 by Maxim Integrated Products is an OTP ROM.
OTP ROMs are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for DS2502P-E64
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 50 |
|
RFQ |
Part Details for DS2502P-E64
DS2502P-E64 CAD Models
DS2502P-E64 Part Data Attributes
|
|
DS2502P-E64
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
DS2502P-E64
Maxim Integrated Products
OTP ROM, 1KX1, MOS, PDSO6, TSOC-6
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | TSOC-6 | |
| Pin Count | 6 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.32.00.71 |
Alternate Parts for DS2502P-E64
This table gives cross-reference parts and alternative options found for DS2502P-E64. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DS2502P-E64, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DS2502P-E64+ | Maxim Integrated Products | $3.2467 | OTP ROM, 1KX1, MOS, PDSO6, TSOC-6 | DS2502P-E64 vs DS2502P-E64+ |
| DS2502P-E64+ | Analog Devices Inc | Check for Price | IEEE EUI-64 Node Address Chip, 6-PLCC-N/A, 6 Pins, -40 to 85C | DS2502P-E64 vs DS2502P-E64+ |
DS2502P-E64 Frequently Asked Questions (FAQ)
-
The DS2502P-E64 can operate over a temperature range of -40°C to +85°C, but it's recommended to operate within -20°C to +70°C for optimal performance.
-
To ensure reliable communication, make sure to use a pull-up resistor on the 1-Wire bus, maintain a minimum bus capacitance of 750pF, and use a 1-Wire master device that complies with the 1-Wire protocol specification.
-
Yes, the DS2502P-E64 can be used in a multi-drop configuration, but each device must have a unique ROM ID and be addressed individually to avoid data corruption.
-
The DS2502P-E64 has an internal power-on reset circuit that resets the device when the supply voltage falls below 2.5V. For brown-out detection, use an external voltage supervisor or a microcontroller with a built-in brown-out detection feature.
-
To minimize EMI and noise, use a ground plane, keep the 1-Wire bus traces short and away from noise sources, and use a common-mode choke or ferrite bead on the VCC line. Also, avoid running the 1-Wire bus traces near the edges of the PCB.