Part Details for DS2502P/T&R by Maxim Integrated Products
Results Overview of DS2502P/T&R by Maxim Integrated Products
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Education and Research
Security and Surveillance
Financial Technology (Fintech)
Computing and Data Storage
Energy and Power Systems
DS2502P/T&R Information
DS2502P/T&R by Maxim Integrated Products is an OTP ROM.
OTP ROMs are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for DS2502P/T&R
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Memory ICs | 853 |
|
RFQ |
Part Details for DS2502P/T&R
DS2502P/T&R CAD Models
DS2502P/T&R Part Data Attributes
|
|
DS2502P/T&R
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
DS2502P/T&R
Maxim Integrated Products
OTP ROM, 128X8, 15000ns, CMOS, PDSO6, TSOC-6
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | TSOC-6 | |
| Pin Count | 6 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.32.00.71 |
Alternate Parts for DS2502P/T&R
This table gives cross-reference parts and alternative options found for DS2502P/T&R. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DS2502P/T&R, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DS2502P+T&R/ | Maxim Integrated Products | Check for Price | 128X8 OTPROM, PDSO6, TSOC-6 | DS2502P/T&R vs DS2502P+T&R/ |
DS2502P/T&R Frequently Asked Questions (FAQ)
-
The maximum number of devices that can be connected to a single 1-Wire bus is 256, as each device has a unique 64-bit ROM code that is used to identify it on the bus.
-
The DS2502P/T&R has a built-in voltage detector that can detect voltage drops or brownouts on the 1-Wire bus and will reset the device if the voltage falls below a certain threshold (typically around 2.5V).
-
Yes, the DS2502P/T&R can be used in applications where the 1-Wire bus is not continuously powered. The device has a low-power standby mode that allows it to retain its internal state even when the bus is not powered.
-
The DS2502P/T&R uses a collision detection and arbitration mechanism to handle conflicts or collisions on the 1-Wire bus. If a collision is detected, the device will retry the transmission after a random delay.
-
Yes, the DS2502P/T&R is rated for operation up to 85°C, making it suitable for use in high-temperature applications. However, the device's accuracy and reliability may be affected at extreme temperatures.