Part Details for DS2406P by Maxim Integrated Products
Results Overview of DS2406P by Maxim Integrated Products
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Smart Cities
DS2406P Information
DS2406P by Maxim Integrated Products is an OTP ROM.
OTP ROMs are under the broader part category of Memory Components.
Memory components are essential in electronics for computer processing. They can be volatile or non-volatile, depending on the desired function. Read more about Memory Components on our Memory part category page.
Price & Stock for DS2406P
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Chip-Germany GmbH | RoHS: Not Compliant | 28 |
|
RFQ |
Part Details for DS2406P
DS2406P CAD Models
DS2406P Part Data Attributes
|
|
DS2406P
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
DS2406P
Maxim Integrated Products
OTP ROM, 1KX1, CMOS, PDSO6, TSOC-6
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | TSOC-6 | |
| Pin Count | 6 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8473.30.11.80 | |
| JESD-30 Code | R-PDSO-C6 | |
| JESD-609 Code | e0 | |
| Length | 3.94 mm | |
| Memory Density | 1024 bit | |
| Memory IC Type | OTP ROM | |
| Memory Width | 1 | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 6 | |
| Number of Words | 1024 words | |
| Number of Words Code | 1000 | |
| Operating Mode | ASYNCHRONOUS | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Organization | 1KX1 | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOC | |
| Package Equivalence Code | SOC6,.17 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Parallel/Serial | SERIAL | |
| Peak Reflow Temperature (Cel) | 240 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.5 mm | |
| Supply Voltage-Max (Vsup) | 6 V | |
| Supply Voltage-Min (Vsup) | 2.8 V | |
| Supply Voltage-Nom (Vsup) | 3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Terminal Form | C BEND | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 20 | |
| Width | 3.76 mm |
Alternate Parts for DS2406P
This table gives cross-reference parts and alternative options found for DS2406P. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DS2406P, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DS2406P+ | Analog Devices Inc | $2.9224 | Dual Addressable Switch Plus 1Kb Memory, 6-PLCC-N/A, 6 Pins, -40 to 85C | DS2406P vs DS2406P+ |
DS2406P Frequently Asked Questions (FAQ)
-
Theoretically, up to 256 devices can be connected to a single 1-Wire bus, but in practice, the maximum number is limited by the bus capacitance and the signal quality. A good rule of thumb is to limit the number of devices to 10-20 per bus.
-
To ensure reliable communication, use a 1-Wire bus with a maximum length of 100 meters, and add a 1-kΩ pull-up resistor to the DQ pin. Additionally, use a 1-Wire bus master with a strong pull-up capability, and consider using a repeater or a buffer to boost the signal.
-
No, the DS2406P is designed to operate with a 3.3V power supply. Using a 5V power supply may damage the device or affect its performance. If you need to interface with a 5V system, use a level translator or a voltage regulator to step down the voltage.
-
In the unlikely event that multiple DS2406P devices have the same ROM ID, you can use the DS2406P's unique 48-bit serial number to differentiate between them. Alternatively, you can use an external serial number or a unique identifier stored in the device's memory.
-
The DS2406P supports a maximum data transfer rate of 15.4 kbps. However, the actual data transfer rate may be limited by the 1-Wire bus master and the system's overall performance.