Part Details for DS18S20Z by Maxim Integrated Products
Results Overview of DS18S20Z by Maxim Integrated Products
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Automotive
DS18S20Z Information
DS18S20Z by Maxim Integrated Products is a Temperature Sensor.
Temperature Sensors are under the broader part category of Sensors/Transducers.
Sensors and transducers detect and measure physical quantities like temperature, pressure, and force, converting them into electrical signals for various applications. Read more about Sensors/Transducers on our Sensors/Transducers part category page.
Price & Stock for DS18S20Z
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 37 |
|
RFQ | ||
|
|
Cytech Systems Limited | SENSOR DIGITAL -55C-125C 8SOIC | 250 |
|
RFQ | |
|
|
Win Source Electronics | SENSOR TEMPERATURE 1-WIRE 8SOIC | 20000 |
|
$1.5000 / $1.9375 | Buy Now |
Part Details for DS18S20Z
DS18S20Z CAD Models
DS18S20Z Part Data Attributes
|
|
DS18S20Z
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
DS18S20Z
Maxim Integrated Products
Serial Switch/Digital Sensor, 9 Bit(s), 0.50Cel, Rectangular, 8 Pin, Surface Mount, SOP-8
|
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Package Description | SOP-8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Accuracy-Max (Cel) | 0.5 Cel | |
| Additional Feature | COMPLIANCE TO MIL-150 | |
| Body Breadth | 3.91 mm | |
| Body Height | 1.395 mm | |
| Body Length or Diameter | 4.88 mm | |
| Housing | PLASTIC | |
| JESD-609 Code | e0 | |
| Mounting Feature | SURFACE MOUNT | |
| Number of Bits | 9 | |
| Number of Terminals | 8 | |
| Operating Current-Max | 1.5 mA | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -55 °C | |
| Output Interface Type | 1-WIRE INTERFACE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape/Style | RECTANGULAR | |
| Sensors/Transducers Type | TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 3 V | |
| Surface Mount | YES | |
| Terminal Finish | Tin/Lead (Sn/Pb) | |
| Termination Type | SOLDER |
Alternate Parts for DS18S20Z
This table gives cross-reference parts and alternative options found for DS18S20Z. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DS18S20Z, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DS18S20Z/T&R | Maxim Integrated Products | Check for Price | Serial Switch/Digital Sensor, 9 Bit(s), 0.50Cel, Rectangular, 8 Pin, Surface Mount, SOP-8 | DS18S20Z vs DS18S20Z/T&R |
DS18S20Z Frequently Asked Questions (FAQ)
-
The DS18S20Z has an accuracy of ±0.5°C from -10°C to +85°C, and ±1°C from -40°C to -10°C and +85°C to +125°C.
-
Each DS18S20Z has a unique 64-bit ROM code, allowing multiple sensors to be connected to a single bus. The master device can then address each sensor individually using its unique ROM code.
-
The maximum cable length for the 1-Wire bus is approximately 100 meters, but this can be extended using repeaters or other signal conditioning techniques.
-
The DS18S20Z has built-in error detection and correction mechanisms, including cyclic redundancy checks (CRCs) and error flags. The host device can also implement additional error handling and fault detection mechanisms.
-
Yes, the DS18S20Z is designed to operate in harsh environments and can withstand vibrations up to 10g and shocks up to 100g.