Part Details for DS1100Z-500+T by Analog Devices Inc
Results Overview of DS1100Z-500+T by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (5 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Space Technology
Aerospace and Defense
Telecommunications
Communication and Networking
Automotive
DS1100Z-500+T Information
DS1100Z-500+T by Analog Devices Inc is a Delay Line.
Delay Lines are under the broader part category of Logic Components.
Digital logic governs the behavior of signals in electronic circuits, enabling complex decisions based on simple binary inputs (yes/no). Logic components perform operations from these signals. Read more about Logic Components on our Logic part category page.
Price & Stock for DS1100Z-500+T
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
700-DS1100Z-500+T
|
Mouser Electronics | Delay Lines / Timing Elements 5-Tap Economy Timing Element (Delay Line RoHS: Compliant | 2483 |
|
$5.3100 / $9.5300 | Buy Now |
|
|
Analog Devices Inc | 5-Tap Economy Timing Element ( Min Qty: 1 Package Multiple: 1 | 177 |
|
$4.1800 / $11.0300 | Buy Now |
Part Details for DS1100Z-500+T
DS1100Z-500+T CAD Models
DS1100Z-500+T Part Data Attributes
|
|
DS1100Z-500+T
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
DS1100Z-500+T
Analog Devices Inc
5-Tap Economy Timing Element (Delay Line), 8-SOIC_N-150_MIL, 8 Pins, -40 to 85C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 8-SOIC_N-150_MIL | |
| Package Description | 0.150 INCH, ROHS COMPLIANT, SOP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 8-SOIC_N-150_MIL | |
| Reach Compliance Code | compliant | |
| Date Of Intro | 2002-09-12 | |
| Samacsys Manufacturer | Analog Devices | |
| Family | 1100 | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Logic IC Type | SILICON DELAY LINE | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Taps/Steps | 5 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Polarity | TRUE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power Supply Current-Max (ICC) | 50 mA | |
| Programmable Delay Line | NO | |
| Prop. Delay@Nom-Sup | 500 ns | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max (Vsup) | 5.25 V | |
| Supply Voltage-Min (Vsup) | 4.75 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Total Delay-Nom (td) | 500 ns | |
| Width | 3.9 mm |
Alternate Parts for DS1100Z-500+T
This table gives cross-reference parts and alternative options found for DS1100Z-500+T. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DS1100Z-500+T, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DS1100Z-500 | Maxim Integrated Products | Check for Price | Silicon Delay Line, 1-Func, 5-Tap, True Output, CMOS, PDSO8, 0.150 INCH, SOP-8 | DS1100Z-500+T vs DS1100Z-500 |
DS1100Z-500+T Frequently Asked Questions (FAQ)
-
The recommended power-up sequence is to apply the analog power supply (VCC) first, followed by the digital power supply (VDD), and then the clock signal. This ensures proper initialization and prevents damage to the device.
-
To optimize performance in high-frequency applications, ensure that the PCB layout is optimized for high-frequency signals, use a low-jitter clock source, and consider using a clock buffer or repeater to reduce clock skew. Additionally, ensure that the analog and digital power supplies are well-decoupled and filtered.
-
The maximum clock frequency that can be used with the DS1100Z-500+T is 500 MHz. However, the actual clock frequency limit may be lower depending on the specific application and PCB layout.
-
The DS1100Z-500+T can be configured for differential or single-ended input modes through the use of external resistors and capacitors. Refer to the datasheet and application notes for specific configuration guidelines.
-
The typical power consumption of the DS1100Z-500+T is around 1.2 W at a clock frequency of 500 MHz. However, actual power consumption may vary depending on the specific application and operating conditions.