Part Details for DHS10S by APEM Inc
Results Overview of DHS10S by APEM Inc
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
DHS10S Information
DHS10S by APEM Inc is a DIP Switch.
DIP Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for DHS10S
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
642-DHS10S
|
Mouser Electronics | DIP Switches / SIP Switches Surface mount dip 10 pos. RoHS: Compliant | 0 |
|
$2.8700 / $2.8900 | Order Now |
|
|
Onlinecomponents.com | Switch DIP OFF ON SPST 10 Flush Slide 0.1A 6VDC Gull Wing 1.27mm SMD T/R RoHS: Compliant |
74 In Stock |
|
$2.2260 / $7.4300 | Buy Now |
|
DISTI #
51509865
|
Verical | Switch DIP OFF ON SPST 10 Flush Slide 0.1A 6VDC Gull Wing 1.27mm SMD T/R Min Qty: 8 Package Multiple: 4 Date Code: 1812 | Americas - 72 |
|
$3.4580 / $9.6590 | Buy Now |
|
|
Bristol Electronics | 265 |
|
RFQ | ||
|
|
Quest Components | SLIDE DIP SWITCH-10SWITCHES, SPST, LATCHED,0.1A, 6VDC, SURFACE MOUNT-STRAIGHT | 212 |
|
$5.4698 / $9.9450 | Buy Now |
|
|
Master Electronics | Switch DIP OFF ON SPST 10 Flush Slide 0.1A 6VDC Gull Wing 1.27mm SMD T/R RoHS: Compliant |
74 In Stock |
|
$2.2260 / $7.4300 | Buy Now |
Part Details for DHS10S
DHS10S CAD Models
DHS10S Part Data Attributes
|
|
DHS10S
APEM Inc
Buy Now
Datasheet
|
Compare Parts:
DHS10S
APEM Inc
Slide Dip Switch, 10 Switches, SPST, On-off, Latched, 0.1A, 6VDC, Solder Terminal, Surface Mount-straight
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | APEM COMPONENTS INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.90.65 | |
| Samacsys Manufacturer | Apem | |
| Actuator Angle | ||
| Actuator Material | POLYAMIDE | |
| Actuator Type | SLIDE TYPE | |
| Additional Feature | ULTRA-COMPACT LOW PROFILE | |
| Body Breadth | 6.2 mm | |
| Body Color | BLACK | |
| Body Height | 2.21 mm | |
| Body Length or Diameter | 14.43 mm | |
| Center Contact Material | BERYLLIUM COPPER | |
| Center Contact Plating | GOLD | |
| Contact Current(DC)-Max | 0.1 A | |
| Contact (DC) Max Rating R Load | .1A@6VDC | |
| Contact Function | ON-OFF | |
| Contact Resistance | 0.1 mΩ | |
| Contact Voltage(DC)-Max | 6 V | |
| Dielectric Withstand Volts | 250VDC V | |
| Electrical Life | 1000 Cycle(s) | |
| End Contact Material | BERYLLIUM COPPER | |
| End Contact Plating | GOLD | |
| Housing Material | GLASS FILLED POLYPHENYLENE SULPHIDE | |
| Insulation Resistance | 100000000 Ω | |
| Insulator Material | GLASS FILLED POLYPHENYLENE SULPHIDE | |
| JESD-609 Code | e4 | |
| Mounting Feature | SURFACE MOUNT-STRAIGHT | |
| Number of Positions | 10 | |
| Number of Switch Sections | 10 | |
| Operating Temperature-Max | 80 °C | |
| Operating Temperature-Min | -40 °C | |
| Packing Method | TAPE AND REEL | |
| Sealing | EPOXY TERMINAL SEALED | |
| Solderability | WAVE | |
| Surface Mount | NO | |
| Switch Action | LATCHED | |
| Switch Function | SPST | |
| Switch Type | SLIDE DIP SWITCH | |
| Terminal Finish | Gold (Au) | |
| Terminal Material | COPPER ALLOY | |
| Termination Type | SOLDER | |
| Washability | SOLVENT |
Alternate Parts for DHS10S
This table gives cross-reference parts and alternative options found for DHS10S. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DHS10S, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| TDA10H0SK1 | ITT Interconnect Solutions | Check for Price | Slide Dip Switch, 10 Switches, SPST, Off-on, Latched, 0.025A, 24VDC, Solder Terminal, Surface Mount-straight | DHS10S vs TDA10H0SK1 |
| 21810LPST | CTS Corporation | Check for Price | SLIDE DIP SWITCH-10SWITCHES, SPST, LATCHED,0.025A, 24VDC, SURFACE MOUNT-STRAIGHT, ROHS COMPLIANT | DHS10S vs 21810LPST |
DHS10S Frequently Asked Questions (FAQ)
-
The recommended torque for the DHS10S's screw terminals is 0.8 Nm (7 lb-in) to ensure reliable connections.
-
Yes, the DHS10S is designed to withstand high-vibration environments, with a vibration resistance of 10-2000 Hz, 10G acceleration.
-
The DHS10S operates within a temperature range of -40°C to 85°C (-40°F to 185°F), making it suitable for various industrial and commercial applications.
-
Yes, the DHS10S is designed to be resistant to water and cleaning agents, with an IP67 rating, making it suitable for use in harsh environments.
-
No, the DHS10S is not designed for use in explosive or hazardous environments. It does not have any specific certifications for such use cases.