Part Details for DG528EWN+ by Maxim Integrated Products
Results Overview of DG528EWN+ by Maxim Integrated Products
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (5 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Aerospace and Defense
Communication and Networking
DG528EWN+ Information
DG528EWN+ by Maxim Integrated Products is a Multiplexer or Switch.
Multiplexers or Switches are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for DG528EWN+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
DG528EWN+-ND
|
DigiKey | IC MUX 8:1 450OHM 18SOIC Min Qty: 1 Lead time: 10 Weeks Container: Tube | Temporarily Out of Stock |
|
$9.2600 / $14.8600 | Buy Now |
|
|
Rochester Electronics | DG528 - 8-Channel, Latchable Multiplexer RoHS: Compliant Status: Active Min Qty: 1 | 169 |
|
$7.1800 / $8.9700 | Buy Now |
Part Details for DG528EWN+
DG528EWN+ CAD Models
DG528EWN+ Part Data Attributes
|
|
DG528EWN+
Maxim Integrated Products
Buy Now
Datasheet
|
Compare Parts:
DG528EWN+
Maxim Integrated Products
Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO18, 0.300 INCH, SOP-18
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | MAXIM INTEGRATED PRODUCTS INC | |
| Part Package Code | SOIC | |
| Package Description | 0.300 INCH, SOP-18 | |
| Pin Count | 18 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER | |
| JESD-30 Code | R-PDSO-G18 | |
| JESD-609 Code | e3 | |
| Length | 11.55 mm | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage-Max (Vsup) | -20 V | |
| Neg Supply Voltage-Min (Vsup) | -4.5 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Channels | 8 | |
| Number of Functions | 1 | |
| Number of Terminals | 18 | |
| Off-state Isolation-Nom | 68 dB | |
| On-state Resistance Match-Nom | 27 Ω | |
| On-state Resistance-Max (Ron) | 450 Ω | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP18,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.65 mm | |
| Supply Voltage-Max (Vsup) | 20 V | |
| Supply Voltage-Min (Vsup) | 4.5 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Switch-off Time-Max | 1500 ns | |
| Switch-on Time-Max | 1500 ns | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 7.5 mm |
Alternate Parts for DG528EWN+
This table gives cross-reference parts and alternative options found for DG528EWN+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DG528EWN+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DG528CWN+ | Maxim Integrated Products | $6.7273 | Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO18, 0.300 INCH, SOP-18 | DG528EWN+ vs DG528CWN+ |
| DG528CWN | Maxim Integrated Products | Check for Price | Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO18, 0.300 INCH, SOP-18 | DG528EWN+ vs DG528CWN |
| DG528CY | Rochester Electronics LLC | Check for Price | Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO18, PACKAGE-18 | DG528EWN+ vs DG528CY |
| DG528EWN | Rochester Electronics LLC | Check for Price | Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO18, 0.300 INCH, SOP-18 | DG528EWN+ vs DG528EWN |
| DG528BY | Harris Semiconductor | Check for Price | Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO18 | DG528EWN+ vs DG528BY |
DG528EWN+ Frequently Asked Questions (FAQ)
-
A good PCB layout for the DG528EWN+ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and ensure optimal performance.
-
The DG528EWN+ requires a single 3.3V power supply, and it's recommended to use a low-dropout linear regulator (LDO) to power the device. The power sequencing requirement is to power up the device after the power supply has stabilized, and to ensure that the power supply is within the recommended operating range of 3.0V to 3.6V.
-
The recommended clock frequency for the DG528EWN+ is 25MHz, and the clock signal quality should be as clean as possible with minimal jitter. A clock signal with a duty cycle of 50% and a rise/fall time of less than 5ns is recommended.
-
The DG528EWN+ has several configuration options that can be set through the SPI interface. The optimal configuration will depend on the specific application, but common settings include the gain, bandwidth, and output mode. It's recommended to consult the datasheet and application notes for guidance on configuring the device for optimal performance.
-
The DG528EWN+ has a maximum junction temperature of 150°C, and it's recommended to keep the device within a temperature range of -40°C to 85°C for reliable operation. Thermal considerations include providing adequate heat sinking, using a thermal interface material, and ensuring good airflow around the device.