Part Details for DG411FDY+ by Analog Devices Inc
Results Overview of DG411FDY+ by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (3 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Environmental Monitoring
Industrial Automation
Aerospace and Defense
Agriculture Technology
Medical Imaging
Communication and Networking
DG411FDY+ Information
DG411FDY+ by Analog Devices Inc is a Multiplexer or Switch.
Multiplexers or Switches are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Price & Stock for DG411FDY+
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
700-DG411FDY+
|
Mouser Electronics | Analog Switch ICs Quad, Rail-to-Rail, Fault-Protected, SPS RoHS: Compliant | 1642 |
|
$6.9100 / $11.1000 | Buy Now |
|
|
Analog Devices Inc | Quad, Rail-to-Rail, Fault-Prot Package Multiple: 1 | 112 |
|
$6.7665 / $11.1000 | Buy Now |
Part Details for DG411FDY+
DG411FDY+ CAD Models
DG411FDY+ Part Data Attributes
|
|
DG411FDY+
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
DG411FDY+
Analog Devices Inc
Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches, 16-SOIC_N-150_MIL, 16 Pins, -40 to 85C
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | 16-SOIC_N-150_MIL | |
| Package Description | SOIC-16 | |
| Pin Count | 16 | |
| Manufacturer Package Code | 16-SOIC_N-150_MIL | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.60 | |
| Date Of Intro | 2002-05-24 | |
| Samacsys Manufacturer | Analog Devices | |
| Analog IC - Other Type | SPST | |
| JESD-30 Code | R-PDSO-G16 | |
| JESD-609 Code | e3 | |
| Length | 9.9 mm | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage-Max (Vsup) | -20 V | |
| Neg Supply Voltage-Min (Vsup) | -4.5 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Channels | 1 | |
| Number of Functions | 4 | |
| Number of Terminals | 16 | |
| Off-state Isolation-Nom | 65 dB | |
| On-state Resistance Match-Nom | 0.2 Ω | |
| On-state Resistance-Max (Ron) | 35 Ω | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.75 mm | |
| Supply Voltage-Max (Vsup) | 20 V | |
| Supply Voltage-Min (Vsup) | 4.5 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Switch-off Time-Max | 145 ns | |
| Switch-on Time-Max | 175 ns | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 3.9 mm |
Alternate Parts for DG411FDY+
This table gives cross-reference parts and alternative options found for DG411FDY+. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DG411FDY+, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DG411FDY-T | Maxim Integrated Products | Check for Price | SPST, 4 Func, 1 Channel, CMOS, PDSO16, SOIC-16 | DG411FDY+ vs DG411FDY-T |
| DG411FDY+T | Maxim Integrated Products | Check for Price | SPST, 4 Func, 1 Channel, CMOS, PDSO16, SOIC-16 | DG411FDY+ vs DG411FDY+T |
| DG411FDY+ | Maxim Integrated Products | Check for Price | SPST, 4 Func, 1 Channel, CMOS, PDSO16, SOIC-16 | DG411FDY+ vs DG411FDY+ |
DG411FDY+ Frequently Asked Questions (FAQ)
-
A good PCB layout for the DG411FDY+ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, use short traces and avoid routing digital signals near the analog signals.
-
The DG411FDY+ requires a dual supply voltage of ±15V or ±12V. Ensure that the power supplies are well-regulated and have low noise. The power sequencing requirement is to power up the V+ supply first, followed by the V- supply, and then the digital supply (VCC).
-
The maximum operating frequency of the DG411FDY+ is 100 kHz. Operating the device at frequencies above 100 kHz may result in reduced performance, increased distortion, and decreased signal-to-noise ratio.
-
To configure the DG411FDY+ for bidirectional switching, connect the S1 and S2 pins to the desired signal sources. Ensure that the signal sources are properly terminated and that the device is properly powered. In bidirectional mode, the device's on-resistance and capacitance may affect the signal integrity, so proper signal conditioning and filtering may be required.
-
The DG411FDY+ has a maximum junction temperature of 125°C. To ensure reliable operation, provide adequate heat sinking, use a thermally conductive PCB material, and ensure good airflow around the device. In high-temperature environments, consider using a heat sink or a thermoelectric cooler to maintain a safe operating temperature.