Part Details for DF10S-E3/45 by Vishay Semiconductors
Results Overview of DF10S-E3/45 by Vishay Semiconductors
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (10 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
DF10S-E3/45 Information
DF10S-E3/45 by Vishay Semiconductors is a Bridge Rectifier Diode.
Bridge Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for DF10S-E3/45
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
DF10S-E3/45GI-ND
|
DigiKey | BRIDGE RECT 1PHASE 1KV 1A DFS Min Qty: 1 Lead time: 10 Weeks Container: Tube |
6980 In Stock |
|
$0.2673 / $0.7500 | Buy Now |
|
DISTI #
DF10S-E3/45
|
IBS Electronics | DF10S-E3/45 by GENERAL SEMICONDUCTOR (VISHAY) is a 1000V 50A miniature glass passivated single-phase bridge rectifier, ideal for AC to DC conversion in compact applications. Min Qty: 50 Package Multiple: 1 | 500 |
|
$0.1742 / $0.1937 | Buy Now |
Part Details for DF10S-E3/45
DF10S-E3/45 CAD Models
DF10S-E3/45 Part Data Attributes
|
|
DF10S-E3/45
Vishay Semiconductors
Buy Now
Datasheet
|
Compare Parts:
DF10S-E3/45
Vishay Semiconductors
Diode Rectifier Bridge Single 1KV 1A 4-Pin Case DFS Tube
|
| Pbfree Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | VISHAY SEMICONDUCTORS | |
| Package Description | R-PDSO-G4 | |
| Pin Count | 4 | |
| Manufacturer Package Code | CASE DFS | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.80 | |
| Breakdown Voltage-Min | 1000 V | |
| Configuration | BRIDGE, 4 ELEMENTS | |
| Diode Element Material | SILICON | |
| Diode Type | BRIDGE RECTIFIER DIODE | |
| Forward Voltage-Max (VF) | 1.1 V | |
| JESD-30 Code | R-PDSO-G4 | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 1 | |
| Non-rep Pk Forward Current-Max | 50 A | |
| Number of Elements | 4 | |
| Number of Phases | 1 | |
| Number of Terminals | 4 | |
| Operating Temperature-Max | 150 °C | |
| Operating Temperature-Min | -55 °C | |
| Output Current-Max | 1 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 250 | |
| Qualification Status | Not Qualified | |
| Reference Standard | UL RECOGNIZED | |
| Rep Pk Reverse Voltage-Max | 1000 V | |
| Surface Mount | YES | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 |
Alternate Parts for DF10S-E3/45
This table gives cross-reference parts and alternative options found for DF10S-E3/45. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of DF10S-E3/45, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| DF10S | onsemi | $0.3371 | 1.5A Bridge Rectifier, PDIP-4 GW, 1500-REEL | DF10S-E3/45 vs DF10S |
| DF10S | Fagor Electrónica | Check for Price | Bridge Rectifier Diode, 1 Phase, 1A, 1000V V(RRM), Silicon, DF-S, 4 PIN | DF10S-E3/45 vs DF10S |
| DF10S | Diodes Incorporated | Check for Price | Bridge Rectifier Diode, 1 Phase, 1A, 1000V V(RRM), Silicon, ROHS COMPLIANT, PLASTIC, DF-S, 4 PIN | DF10S-E3/45 vs DF10S |
| DB107-S | Surge Components Inc | Check for Price | Bridge Rectifier Diode, | DF10S-E3/45 vs DB107-S |
| DF10S | International Rectifier | Check for Price | Bridge Rectifier Diode, 1 Phase, 1A, 1000V V(RRM), Silicon, SURFACE MOUNT PACKAGE-4 | DF10S-E3/45 vs DF10S |
| CBR1-D100SBK | Central Semiconductor Corp | Check for Price | Bridge Rectifier Diode, 1 Phase, 1A, 1000V V(RRM), Silicon, | DF10S-E3/45 vs CBR1-D100SBK |
| DF10S | Gulfsemi | Check for Price | Bridge Rectifier Diode, 1 Phase, 1A, 1000V V(RRM), Silicon, PLASTIC, DFS, 4 PIN | DF10S-E3/45 vs DF10S |
| DF10STRR16 | International Rectifier | Check for Price | Bridge Rectifier Diode, 1 Phase, 1A, 1000V V(RRM), Silicon, SURFACE MOUNT PACKAGE-4 | DF10S-E3/45 vs DF10STRR16 |
| DF10S | Fuji Electric Co Ltd | Check for Price | Bridge Rectifier Diode, 1 Phase, 1A, 1000V V(RRM), Silicon | DF10S-E3/45 vs DF10S |
| DB107S | Goodwork Semiconductor Co Ltd | Check for Price | Bridge Rectifier Diode, 1A, 1000V V(RRM) | DF10S-E3/45 vs DB107S |
DF10S-E3/45 Frequently Asked Questions (FAQ)
-
The recommended soldering temperature is 260°C (500°F) with a maximum soldering time of 10 seconds. It's essential to follow the recommended soldering profile to prevent damage to the component.
-
Handle the component in an ESD-protected environment, wear an ESD wrist strap or use ESD-safe tools, and avoid touching the component's pins or leads. Store the component in its original packaging or an ESD-safe container when not in use.
-
The maximum allowable voltage derating is 80% of the rated voltage. For example, if the rated voltage is 45V, the maximum allowable voltage derating would be 36V (80% of 45V).
-
While the DF10S-E3/45 is suitable for high-frequency applications, it's essential to consider the component's self-resonant frequency (SRF) and ensure that the operating frequency is below the SRF to prevent unwanted resonance and potential component failure.
-
The correct orientation of the DF10S-E3/45 is indicated by the marking on the component. The marking should face upwards, and the component should be oriented according to the recommended land pattern and polarity markings on the PCB.