Part Details for CS8190EDWF20G by onsemi
Results Overview of CS8190EDWF20G by onsemi
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Renewable Energy
Automotive
CS8190EDWF20G Information
CS8190EDWF20G by onsemi is an Other Signal Circuit.
Other Signal Circuits are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Part Details for CS8190EDWF20G
CS8190EDWF20G CAD Models
CS8190EDWF20G Part Data Attributes
|
|
CS8190EDWF20G
onsemi
Buy Now
Datasheet
|
Compare Parts:
CS8190EDWF20G
onsemi
Motor Driver, Precision Air-Core, Tachometer / Speedometer, with Return to Zero, SOIC-20 WB, 38-TUBE
|
| Pbfree Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ON SEMICONDUCTOR | |
| Part Package Code | SOIC-20 WB | |
| Package Description | SOP-20 | |
| Pin Count | 20 | |
| Manufacturer Package Code | 751D-05 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | onsemi | |
| Analog IC - Other Type | ANALOG CIRCUIT | |
| JESD-30 Code | R-PDSO-G20 | |
| Length | 12.8 mm | |
| Number of Channels | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 20 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP20,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Seated Height-Max | 2.65 mm | |
| Supply Voltage-Max (Vsup) | 16 V | |
| Supply Voltage-Min (Vsup) | 8.5 V | |
| Supply Voltage-Nom (Vsup) | 13.1 V | |
| Surface Mount | YES | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 7.5 mm |
Alternate Parts for CS8190EDWF20G
This table gives cross-reference parts and alternative options found for CS8190EDWF20G. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of CS8190EDWF20G, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| CS8190EDWF20 | onsemi | Check for Price | Motor Driver, Precision Air-Core, Tachometer / Speedometer, with Return to Zero, SOIC-20 WB, 38-TUBE | CS8190EDWF20G vs CS8190EDWF20 |
CS8190EDWF20G Frequently Asked Questions (FAQ)
-
A good thermal design is crucial for the CS8190EDWF20G. Onsemi recommends a 2-layer or 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat efficiently. A minimum of 2 oz copper thickness is recommended for the top and bottom layers.
-
To ensure reliable operation at high temperatures, it's essential to follow the recommended operating conditions, including junction temperature (Tj) and ambient temperature (Ta). Onsemi recommends using a heat sink or thermal interface material to keep the junction temperature below 150°C.
-
Although the datasheet specifies the recommended operating voltage range, it's essential to note that the maximum allowed voltage on the input pins is 6.5V, which is higher than the recommended VCC of 5V. However, it's still important to follow the recommended operating conditions to ensure reliable operation.
-
If the device is not turning on, check the power supply voltage, ensure that the enable pin (EN) is high, and verify that the input voltage is within the recommended range. Also, check for any short circuits or incorrect pin connections. If the issue persists, consult the onsemi support team for further assistance.
-
The CS8190EDWF20G is a sensitive device and requires proper ESD protection. Onsemi recommends using a human body model (HBM) ESD protection of at least 2 kV and a machine model (MM) ESD protection of at least 200 V. Additionally, follow proper handling and storage procedures to prevent ESD damage.