Part Details for CMPWR025R by onsemi
Results Overview of CMPWR025R by onsemi
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
CMPWR025R Information
CMPWR025R by onsemi is a Power Management Circuit.
Power Management Circuits are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for CMPWR025R
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Cytech Systems Limited | IC REG LINEAR 600MA 8MSOP | 1000 |
|
RFQ |
Part Details for CMPWR025R
CMPWR025R CAD Models
CMPWR025R Part Data Attributes
|
|
CMPWR025R
onsemi
Buy Now
Datasheet
|
Compare Parts:
CMPWR025R
onsemi
600 mA Dual Input SmartOR¿ Power Switch, Micro 8 lead Surface Mount, 4000-REEL
|
| Pbfree Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ON SEMICONDUCTOR | |
| Part Package Code | Micro 8 lead Surface Mount | |
| Package Description | SOP, TSSOP8,.19 | |
| Pin Count | 8 | |
| Manufacturer Package Code | 846A-02 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | onsemi | |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e4 | |
| Moisture Sensitivity Level | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Surface Mount | YES | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.635 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 |
Alternate Parts for CMPWR025R
This table gives cross-reference parts and alternative options found for CMPWR025R. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of CMPWR025R, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| CMPWR025R | California Micro Devices | Check for Price | Power Supply Support Circuit, Fixed, 1 Channel, PDSO8, LEAD FREE, MSOP-8 | CMPWR025R vs CMPWR025R |
CMPWR025R Frequently Asked Questions (FAQ)
-
A good PCB layout for CMPWR025R involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing the length of the input and output traces. A 4-layer PCB with a dedicated power plane is recommended.
-
To ensure the stability of the output voltage, it is essential to use the recommended output capacitor value and type, and to keep the output capacitor close to the device. Additionally, the input voltage should be well-regulated, and the device should be operated within its recommended operating conditions.
-
The maximum ambient temperature that CMPWR025R can operate in is 125°C. However, the device's performance and reliability may degrade at high temperatures, so it is recommended to operate the device at a lower temperature if possible.
-
Yes, CMPWR025R is suitable for high-reliability applications. It is manufactured using a robust process, and it has undergone rigorous testing to ensure its reliability. However, it is essential to follow proper design and manufacturing practices to ensure the reliability of the overall system.
-
To troubleshoot issues with CMPWR025R, start by checking the input voltage, output voltage, and output current. Verify that the device is operated within its recommended operating conditions, and check for any signs of overheating or physical damage. If the issue persists, consult the datasheet and application notes, or contact onsemi's technical support team for assistance.