Part Details for CDILBP1W by Honeywell Sensing and Control
Results Overview of CDILBP1W by Honeywell Sensing and Control
- Distributor Offerings: (6 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
CDILBP1W Information
CDILBP1W by Honeywell Sensing and Control is a Snap Acting/Limit Switch.
Snap Acting/Limit Switches are under the broader part category of Switches.
Electrical switches are binary devices that control the flow of current in a circuit by either allowing or preventing the flow of electrons. Read more about Switches on our Switches part category page.
Price & Stock for CDILBP1W
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
87W9138
|
Newark | Elevator Door Interlock |Honeywell CDILBP1W RoHS: Not Compliant Min Qty: 2 Package Multiple: 1 Date Code: 0 Container: Bulk | 0 |
|
Buy Now | |
|
DISTI #
785-CDILBP1W
|
Mouser Electronics | Limit Switches Comm Door Interlock White Left Key Entry RoHS: Compliant | 1 |
|
$1,649.7600 | Buy Now |
|
DISTI #
70282752
|
RS | Interlock Switch, Door, left key entry, ac/dc solenoid, Terminal strip connector Min Qty: 2 Package Multiple: 1 Container: Bulk | 50 |
|
$2,095.0800 | Buy Now |
|
DISTI #
87092292
|
Verical | Switch Safety Interlock Key 0.35A 24VAC 24VDC Screw Mount Connector 1000000Cycles Min Qty: 1 Package Multiple: 1 Date Code: 2451 | Americas - 24 |
|
$1,408.1579 / $1,483.4923 | Buy Now |
|
|
Master Electronics | Switch Safety Interlock Key 0.35A 24VAC 24VDC Screw Mount Connector 1000000Cycles |
25 In Stock |
|
$1,230.7300 / $1,244.6500 | Buy Now |
|
|
Neutron USA | Interlock Switch, Door, left key entry, ac/dc solenoid, Terminal strip connector | 50 |
|
$1,903.3300 | Buy Now |
Part Details for CDILBP1W
CDILBP1W CAD Models
CDILBP1W Part Data Attributes
|
|
CDILBP1W
Honeywell Sensing and Control
Buy Now
Datasheet
|
Compare Parts:
CDILBP1W
Honeywell Sensing and Control
Snap Acting/Limit Switch
|
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | HONEYWELL SENSING AND CONTROL | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.70.00 | |
| Switch Type | SNAP ACTING/LIMIT SWITCH |
CDILBP1W Frequently Asked Questions (FAQ)
-
Honeywell provides a recommended PCB layout and land pattern in their application note AN223, which can be found on their website. It's essential to follow these guidelines to ensure proper thermal management, reduce noise, and optimize sensor performance.
-
The CDILBP1W is a calibrated sensor, and no additional calibration is required. However, if you need to perform a system-level calibration, Honeywell recommends following the calibration procedure outlined in their application note AN218.
-
The CDILBP1W has a maximum pressure rating of 1.5 times the full-scale pressure range, which is 15 psi (103 kPa) for the 0-10 psi (0-69 kPa) version. Exceeding this rating may damage the sensor.
-
The CDILBP1W is designed to operate in a dry environment. While it can tolerate some humidity, it's not recommended for use in wet or humid environments. If you need a pressure sensor for a humid or wet environment, consider using a sensor with a higher IP rating or a specialized waterproof design.
-
The response time of the CDILBP1W is typically less than 1 ms, making it suitable for most industrial and commercial applications. However, the actual response time may vary depending on the specific use case and system design.