Part Details for CDF10000LD by Coilcraft Inc
Results Overview of CDF10000LD by Coilcraft Inc
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Audio and Video Systems
Entertainment and Gaming
CDF10000LD Information
CDF10000LD by Coilcraft Inc is a Data Line Filter.
Data Line Filters are under the broader part category of Filters.
A filter is an electronic circuit that selectively allows certain frequencies to pass while attenuating others. They are used to extract desired signals and remove noise. Read more about Filters on our Filters part category page.
Price & Stock for CDF10000LD
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
2457-CDF10000LD-ND
|
DigiKey | CMC 5UH 100MA 10LN 520 OHM SMD Min Qty: 1 Lead time: 1 Weeks Container: Strip MARKETPLACE PRODUCT |
365 In Stock |
|
$3.8470 / $5.9100 | Buy Now |
|
DISTI #
994-CDF10000LD
|
Mouser Electronics | Power Line Filters RoHS: Compliant | 0 |
|
$3.2600 / $5.4700 | Order Now |
|
|
Coilcraft Direct | Common mode filter, data line, SMT, RoHS RoHS: Compliant pbFree: No Min Qty: 1 | 456 |
|
$1.9900 / $4.3800 | Buy Now |
Part Details for CDF10000LD
CDF10000LD CAD Models
CDF10000LD Part Data Attributes
|
|
CDF10000LD
Coilcraft Inc
Buy Now
Datasheet
|
Compare Parts:
CDF10000LD
Coilcraft Inc
Data Line Filter, 10 Function(s), 0.1A, 20 Pin(s),
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | COILCRAFT INC | |
| Reach Compliance Code | compliant | |
| Samacsys Manufacturer | COILCRAFT | |
| Additional Feature | IMPEDANCE AT 43MHZ | |
| DC Resistance-Max | 0.25 Ω | |
| Filter Type | DATA LINE FILTER | |
| Height | 4.2 mm | |
| Length | 9.2 mm | |
| Mounting Type | SURFACE MOUNT | |
| Number of Functions | 10 | |
| Number of Terminals | 20 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Impedance | 520 OHM Ω | |
| Packing Method | TR, EMBOSSED PLASTIC, 13 INCH | |
| Rated Current | 0.1 A | |
| Width | 9.2 mm |
CDF10000LD Frequently Asked Questions (FAQ)
-
Coilcraft provides a recommended PCB land pattern in their application notes, which can be found on their website. The recommended land pattern is a rectangular pad with a size of 50 mils x 30 mils (1.27 mm x 0.76 mm) with a 10 mil (0.25 mm) spacing between pads.
-
To minimize the impact of the SRF, ensure that the operating frequency is below the SRF. You can also use impedance matching techniques, such as adding a series resistor or capacitor, to reduce the impedance peak at the SRF. Additionally, consider using a shielded inductor or a different inductor with a lower SRF if possible.
-
The maximum current rating for the CDF10000LD is not explicitly stated in the datasheet. However, Coilcraft provides a current rating calculator on their website, which can be used to determine the maximum current rating based on the operating frequency, temperature, and other factors.
-
The CDF10000LD's temperature rating affects its inductance, Q factor, and current rating. As the temperature increases, the inductance may decrease, and the Q factor may degrade. Ensure that the operating temperature is within the specified range (-40°C to +125°C) to maintain optimal performance.
-
The CDF10000LD is designed to withstand moderate vibration levels. However, if your application involves high-vibration environments, consider using a more ruggedized inductor or taking additional measures to secure the component, such as using a vibration-dampening material or a more robust PCB design.