Part Details for CCM-0503SF by TDK-Lambda Corporation
Results Overview of CCM-0503SF by TDK-Lambda Corporation
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Transportation and Logistics
Renewable Energy
Automotive
CCM-0503SF Information
CCM-0503SF by TDK-Lambda Corporation is an Other Signal Circuit.
Other Signal Circuits are under the broader part category of Signal Circuits.
A signal is an electronic means of transmitting information, either as an analog signal with continuous values or a digital signal with discrete values. Signals are used in various systems and networks. Read more about Signal Circuits on our Signal Circuits part category page.
Part Details for CCM-0503SF
CCM-0503SF CAD Models
CCM-0503SF Part Data Attributes
CCM-0503SF Frequently Asked Questions (FAQ)
-
TDK-Lambda recommends a PCB layout with a solid copper plane underneath the module, and a minimum of 2oz copper thickness to ensure good thermal conductivity. Additionally, it is recommended to have a minimum of 1mm clearance around the module to allow for airflow.
-
To ensure reliable start-up in high-temperature environments, it is recommended to add a soft-start circuit to limit the inrush current during start-up. Additionally, the input voltage should be ramped up slowly to prevent excessive stress on the converter.
-
The maximum allowable capacitance on the output is 2200uF. Exceeding this value may cause instability or oscillation in the converter.
-
Yes, the CCM-0503SF can be used in a redundant configuration. However, it is recommended to use a diode ORing circuit to prevent back-feeding of power between the redundant modules.
-
The recommended input fuse rating is 5A slow-blow. This will provide protection against input overcurrent conditions while allowing the converter to handle normal start-up currents.