Part Details for CA91C142D-33CEV by Integrated Device Technology Inc
Results Overview of CA91C142D-33CEV by Integrated Device Technology Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Renewable Energy
Robotics and Drones
CA91C142D-33CEV Information
CA91C142D-33CEV by Integrated Device Technology Inc is a Bus Controller.
Bus Controllers are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Price & Stock for CA91C142D-33CEV
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 14 |
|
RFQ | ||
|
|
Quest Components | VME BUS CONTROLLER, PBGA313 | 1 |
|
$664.0727 / $683.6043 | Buy Now |
Part Details for CA91C142D-33CEV
CA91C142D-33CEV CAD Models
CA91C142D-33CEV Part Data Attributes
|
|
CA91C142D-33CEV
Integrated Device Technology Inc
Buy Now
Datasheet
|
Compare Parts:
CA91C142D-33CEV
Integrated Device Technology Inc
PBGA-313, Tray
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | INTEGRATED DEVICE TECHNOLOGY INC | |
| Part Package Code | PBGA | |
| Package Description | 35 X 35 MM, PLASTIC, BGA-313 | |
| Pin Count | 313 | |
| Manufacturer Package Code | BGG313 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Address Bus Width | 64 | |
| Bus Compatibility | PCI | |
| Clock Frequency-Max | 33 MHz | |
| Data Transfer Rate-Max | 70 MBps | |
| External Data Bus Width | 64 | |
| JESD-30 Code | S-PBGA-B313 | |
| JESD-609 Code | e1 | |
| Length | 35 mm | |
| Moisture Sensitivity Level | 3 | |
| Number of Terminals | 313 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | BGA | |
| Package Equivalence Code | BGA313,25X25,50 | |
| Package Shape | SQUARE | |
| Package Style | GRID ARRAY | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 3.5 mm | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 4.5 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | TIN SILVER COPPER | |
| Terminal Form | BALL | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | BOTTOM | |
| Width | 35 mm | |
| uPs/uCs/Peripheral ICs Type | BUS CONTROLLER, VME |
Alternate Parts for CA91C142D-33CEV
This table gives cross-reference parts and alternative options found for CA91C142D-33CEV. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of CA91C142D-33CEV, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| CA91C142D-33CE | Integrated Device Technology Inc | $422.1293 | PBGA-313, Tray | CA91C142D-33CEV vs CA91C142D-33CE |
CA91C142D-33CEV Frequently Asked Questions (FAQ)
-
A good PCB layout for the CA91C142D-33CEV involves keeping the input and output traces short and symmetrical, using a solid ground plane, and placing decoupling capacitors close to the device. It's also recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
-
Proper termination for the CA91C142D-33CEV involves using a series resistor (Rs) and a shunt capacitor (Ct) at the receiver end. The values of Rs and Ct depend on the signal frequency and the transmission line impedance. A general guideline is to use Rs = 50-75 ohms and Ct = 10-22 pF.
-
The CA91C142D-33CEV has a maximum junction temperature of 150°C. To ensure reliable operation, it's essential to provide adequate heat sinking, such as a thermal pad or a heat sink, and to maintain a maximum ambient temperature of 85°C. Additionally, ensure good airflow and avoid blocking airflow around the device.
-
To minimize EMI and ensure EMC, use a shielded enclosure, keep the device away from high-frequency sources, and use EMI filters or common-mode chokes on the input and output lines. Also, ensure that the PCB layout is designed to minimize radiation and susceptibility to external interference.
-
The CA91C142D-33CEV requires a specific power sequencing to ensure proper operation. The recommended power-up sequence is to apply VCC first, followed by VEE, and then the input signals. The power-down sequence should be reversed. It's essential to ensure that the power supplies are stable and well-regulated to prevent damage to the device.