Part Details for BTS441RGXT by Infineon Technologies AG
Results Overview of BTS441RGXT by Infineon Technologies AG
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
BTS441RGXT Information
BTS441RGXT by Infineon Technologies AG is a Peripheral Driver.
Peripheral Drivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for BTS441RGXT
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
726-BTS441RGXT
|
Mouser Electronics | Power Switch ICs - Power Distribution SMART HI SIDE POWER SWITCH N-CH 41V RoHS: Compliant | 0 |
|
$2.4900 / $2.6200 | Order Now |
|
|
Vyrian | Interface ICs | 921 |
|
RFQ |
Part Details for BTS441RGXT
BTS441RGXT CAD Models
BTS441RGXT Part Data Attributes
|
|
BTS441RGXT
Infineon Technologies AG
Buy Now
Datasheet
|
Compare Parts:
BTS441RGXT
Infineon Technologies AG
Buffer/Inverter Based Peripheral Driver, 21A, PSSO4, GREEN, PLASTIC, TO-263, 4 PIN
|
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | INFINEON TECHNOLOGIES AG | |
| Part Package Code | D2PAK | |
| Package Description | TO-263, | |
| Pin Count | 4 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Infineon |
Alternate Parts for BTS441RGXT
This table gives cross-reference parts and alternative options found for BTS441RGXT. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of BTS441RGXT, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| BTS441RG | Infineon Technologies AG | $2.6292 | Buffer/Inverter Based Peripheral Driver, 1 Driver, 21A, PSSO4, GREEN, PLASTIC, TO-263, 4 PIN | BTS441RGXT vs BTS441RG |
| BTS441T | Infineon Technologies AG | Check for Price | Buffer/Inverter Based Peripheral Driver, 1 Driver, 21A, MOS, PSSO4, GREEN, PLASTIC, TO-263, 5 PIN | BTS441RGXT vs BTS441T |
| BTS441RS | Infineon Technologies AG | Check for Price | Buffer/Inverter Based Peripheral Driver, 1 Driver, 21A, PSFM5, PLASTIC, STRAIGHT, TO-220, 5 PIN | BTS441RGXT vs BTS441RS |
BTS441RGXT Frequently Asked Questions (FAQ)
-
The maximum operating temperature range for the BTS441RGXT is -40°C to 150°C, but it's recommended to operate within -40°C to 125°C for optimal performance and reliability.
-
Proper cooling can be achieved by using a heat sink with a thermal resistance of ≤ 10 K/W, and ensuring good airflow around the device. Additionally, the PCB design should allow for good thermal conduction and radiation.
-
The recommended PCB layout for the BTS441RGXT includes using a 4-layer PCB with a solid ground plane, placing the device near the edge of the board, and using short and wide traces for the high-current paths.
-
Overvoltage protection can be achieved by using a voltage regulator or a TVS diode, while overcurrent protection can be achieved by using a current sense resistor and a comparator or an overcurrent protection IC.
-
The recommended gate drive voltage for the BTS441RGXT is between 10V and 15V, with a minimum rise and fall time of 10ns to ensure proper switching.