Part Details for BTS3104SDLATMA1 by Infineon Technologies AG
Results Overview of BTS3104SDLATMA1 by Infineon Technologies AG
- Distributor Offerings: (12 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Industrial Automation
Aerospace and Defense
Healthcare
Energy and Power Systems
Renewable Energy
Robotics and Drones
BTS3104SDLATMA1 Information
BTS3104SDLATMA1 by Infineon Technologies AG is a Peripheral Driver.
Peripheral Drivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for BTS3104SDLATMA1
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
13AC8361
|
Newark | Power Load Sw, Low Side, 10V, To-252-3, Power Load Switch Type:Low Side, Input Voltage:10V, Current Limit:13A, On State Resistance:0.104Ohm, Distribution Switch Case Style:To-252, No. Of Pins:3Pins, Thermal Protection:Yes, On/Rohs Compliant: Yes |Infineon BTS3104SDLATMA1 RoHS: Compliant Min Qty: 1 Package Multiple: 1 Date Code: 1 Container: Cut Tape | 1687 |
|
$0.8740 / $1.6800 | Buy Now |
|
DISTI #
BTS3104SDLATMA1CT-ND
|
DigiKey | IC PWR SWITCH N-CHAN 1:1 TO252-3 Min Qty: 1 Lead time: 20 Weeks Container: Digi-Reel®, Cut Tape (CT), Tape & Reel (TR) |
1716 In Stock |
|
$0.7753 / $1.6300 | Buy Now |
|
DISTI #
BTS3104SDLATMA1
|
Avnet Americas | Power Load Switch, Low Side, N-power FET, 1 Output, 0.104 ohm On State, 60 V load, 6 A, TO-252-3 - Tape and Reel (Alt: BTS3104SDLATMA1) RoHS: Compliant Min Qty: 2500 Package Multiple: 2500 Lead time: 20 Weeks, 0 Days Container: Reel | 0 |
|
$0.6763 / $0.7088 | Buy Now |
|
DISTI #
726-BTS3104SDLATMA1
|
Mouser Electronics | Power Switch ICs - Power Distribution HITFET SMART LOWSIDE PWR SW RoHS: Compliant | 2487 |
|
$0.7690 / $2.6300 | Buy Now |
|
DISTI #
71239638
|
Verical | Current Limit SW 1-IN 1-OUT 2V to 10V 2.5A 3-Pin(2+Tab) DPAK T/R Automotive AEC-Q100 Min Qty: 33 Package Multiple: 1 Date Code: 2326 | Americas - 2429 |
|
$0.7880 / $1.0900 | Buy Now |
|
|
Rochester Electronics | BTS3104S - Buffer/Inverter Based Peripheral Driver, 1 Driver, 2.5A RoHS: Compliant Status: Active Min Qty: 1 | 41 |
|
$0.6131 / $0.9888 | Buy Now |
|
DISTI #
BTS3104SDLATMA1
|
IBS Electronics | BTS3104SDLATMA1 by Infineon SCT is a 60V, 2A single-channel smart low-side power switch in a PG-TO252-3-11 package, ideal for automotive and industrial applications with integrated protection features. Min Qty: 2500 Package Multiple: 1 | 0 |
|
$0.9685 | Buy Now |
|
DISTI #
ICIFP44837
|
Rutronik | LSS 104mOhm 60V TO252-3 SMD RoHS: Compliant Min Qty: 2500 Package Multiple: 2500 Container: Reel |
Stock DE - 5000 Stock HK - 0 Stock US - 0 Stock SG - 0 |
|
$0.9771 | Buy Now |
|
DISTI #
BTS3104SDLATMA1
|
Chip One Stop | Semiconductors RoHS: Compliant Min Qty: 1 Lead time: 0 Weeks, 1 Days Container: Cut Tape | 2429 |
|
$0.7880 / $1.4900 | Buy Now |
|
|
Cytech Systems Limited | IC PWR SWITCH N-CHAN 1:1 TO252-3 | 2500 |
|
RFQ |
Part Details for BTS3104SDLATMA1
BTS3104SDLATMA1 CAD Models
BTS3104SDLATMA1 Part Data Attributes
|
|
BTS3104SDLATMA1
Infineon Technologies AG
Buy Now
Datasheet
|
Compare Parts:
BTS3104SDLATMA1
Infineon Technologies AG
Buffer/Inverter Based Peripheral Driver, 2.5A, PSSO2, GREEN, PLASTIC, TO-252, 3 PIN
|
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | INFINEON TECHNOLOGIES AG | |
| Part Package Code | TO-252 | |
| Package Description | GREEN, PLASTIC, TO-252, 3 PIN | |
| Pin Count | 4 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Factory Lead Time | 20 Weeks | |
| Samacsys Manufacturer | Infineon | |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL | |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER | |
| JESD-30 Code | R-PSSO-G2 | |
| JESD-609 Code | e3 | |
| Length | 6.5 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 2 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current Flow Direction | SINK | |
| Output Peak Current Limit-Nom | 2.5 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TO-252 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.5 mm | |
| Supply Voltage-Max | 36 V | |
| Supply Voltage-Min | 8 V | |
| Supply Voltage-Nom | 13.5 V | |
| Surface Mount | YES | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 2.28 mm | |
| Terminal Position | SINGLE | |
| Turn-off Time | 200 µs | |
| Turn-on Time | 120 µs | |
| Width | 6.22 mm |
BTS3104SDLATMA1 Frequently Asked Questions (FAQ)
-
Infineon recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
-
Infineon recommends following the thermal design guidelines, using a heat sink if necessary, and ensuring good airflow around the device. Additionally, consider using a thermal interface material to improve heat transfer.
-
Infineon recommends a peak reflow temperature of 260°C, with a soldering time of 30-60 seconds. A nitrogen atmosphere is recommended to prevent oxidation.
-
Infineon recommends storing the devices in their original packaging, away from direct sunlight and moisture. Avoid bending or flexing the leads, and handle the devices by the body, not the leads.
-
Infineon recommends following standard ESD protection procedures, such as using an ESD wrist strap or mat, and storing the devices in ESD-protective packaging.