Part Details for BAT74 by Philips Semiconductors
Results Overview of BAT74 by Philips Semiconductors
- Distributor Offerings: (9 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Energy and Power Systems
Renewable Energy
BAT74 Information
BAT74 by Philips Semiconductors is a Rectifier Diode.
Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for BAT74
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 5333 |
|
RFQ | ||
|
|
Bristol Electronics | Min Qty: 27 | 5080 |
|
$0.0375 / $0.1875 | Buy Now |
|
|
Bristol Electronics | 4356 |
|
RFQ | ||
|
|
Bristol Electronics | 3000 |
|
RFQ | ||
|
|
Quest Components | 0.2 A, 30 V, 2 ELEMENT, SILICON, SIGNAL DIODE, PLASTIC, SMD, 4 PIN | 8856 |
|
$0.0390 / $0.1200 | Buy Now |
|
|
Quest Components | 0.2 A, 30 V, 2 ELEMENT, SILICON, SIGNAL DIODE, PLASTIC, SMD, 4 PIN | 4266 |
|
$0.0900 / $0.3000 | Buy Now |
|
|
Quest Components | 0.2 A, 30 V, 2 ELEMENT, SILICON, SIGNAL DIODE, PLASTIC, SMD, 4 PIN | 3484 |
|
$0.1350 / $0.6750 | Buy Now |
|
|
Quest Components | 0.2 A, 30 V, 2 ELEMENT, SILICON, SIGNAL DIODE, PLASTIC, SMD, 4 PIN | 2372 |
|
$0.0900 / $0.3000 | Buy Now |
|
|
Quest Components | 0.2 A, 30 V, 2 ELEMENT, SILICON, SIGNAL DIODE, PLASTIC, SMD, 4 PIN | 1704 |
|
$0.0500 / $0.2500 | Buy Now |
Part Details for BAT74
BAT74 CAD Models
BAT74 Part Data Attributes
|
|
BAT74
Philips Semiconductors
Buy Now
Datasheet
|
Compare Parts:
BAT74
Philips Semiconductors
Rectifier Diode, Schottky, 1 Element, 0.2A, 30V V(RRM),
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | PHILIPS SEMICONDUCTORS | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| Configuration | SINGLE | |
| Diode Type | RECTIFIER DIODE | |
| Forward Voltage-Max (VF) | 1 V | |
| Non-rep Pk Forward Current-Max | 0.6 A | |
| Number of Elements | 1 | |
| Number of Phases | 1 | |
| Operating Temperature-Max | 125 °C | |
| Output Current-Max | 0.2 A | |
| Peak Reflow Temperature (Cel) | 260 | |
| Rep Pk Reverse Voltage-Max | 30 V | |
| Surface Mount | YES | |
| Technology | SCHOTTKY |
BAT74 Frequently Asked Questions (FAQ)
-
The BAT74 can operate safely up to 150°C, but it's recommended to keep it below 125°C for optimal performance and reliability.
-
Yes, BAT74 can be used as a switch, but it's not recommended due to its relatively high on-state resistance (Rdson) and limited current handling capability. It's better suited for signal switching and voltage translation applications.
-
To ensure the BAT74 is fully turned off, make sure the input voltage (VCC) is below the minimum specified threshold (typically 0.5V) and the input signal is at a logic low level. Additionally, consider adding a pull-down resistor to the input pin to prevent unwanted turn-on.
-
The BAT74 can operate up to 100 MHz, but its performance may degrade at higher frequencies due to internal capacitances and resistances. It's recommended to check the datasheet for specific frequency-related characteristics and limitations.
-
No, BAT74 is not designed for high-voltage applications. Its maximum voltage rating is 30V, and exceeding this limit can cause permanent damage to the device. If you need a high-voltage switch, consider using a different device specifically designed for high-voltage applications.