-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for BAS116 by Infineon Technologies AG
Results Overview of BAS116 by Infineon Technologies AG
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Available)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
BAS116 Information
BAS116 by Infineon Technologies AG is a Rectifier Diode.
Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Price & Stock for BAS116
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 306 |
|
RFQ | ||
|
|
Quest Components | 0.25 A, SILICON, SIGNAL DIODE | 1801 |
|
$0.0275 / $0.0440 | Buy Now |
|
|
Win Source Electronics | Rectifier Diode Switching 85V 0.25A 1500ns Automotive 3-Pin SOT-23 | 111000 |
|
$0.0219 / $0.0281 | Buy Now |
Part Details for BAS116
BAS116 CAD Models
BAS116 Part Data Attributes
|
|
BAS116
Infineon Technologies AG
Buy Now
Datasheet
|
Compare Parts:
BAS116
Infineon Technologies AG
Rectifier Diode, 1 Element, 0.25A, 85V V(RRM), Silicon, SOT-23, 3 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | End Of Life | |
| Ihs Manufacturer | INFINEON TECHNOLOGIES AG | |
| Package Description | SOT-23, 3 PIN | |
| Pin Count | 3 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.70 | |
| Samacsys Manufacturer | Infineon | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | RECTIFIER DIODE | |
| Forward Voltage-Max (VF) | 0.9 V | |
| JESD-30 Code | R-PDSO-G3 | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 1 | |
| Non-rep Pk Forward Current-Max | 4.5 A | |
| Number of Elements | 1 | |
| Number of Phases | 1 | |
| Number of Terminals | 3 | |
| Operating Temperature-Max | 150 °C | |
| Output Current-Max | 0.25 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Power Dissipation-Max | 0.37 W | |
| Qualification Status | Not Qualified | |
| Rep Pk Reverse Voltage-Max | 85 V | |
| Reverse Recovery Time-Max | 3 µs | |
| Surface Mount | YES | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
Alternate Parts for BAS116
This table gives cross-reference parts and alternative options found for BAS116. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of BAS116, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| BAS116-T | NXP Semiconductors | Check for Price | DIODE 0.215 A, 85 V, SILICON, SIGNAL DIODE, TO-236AB, PLASTIC PACKAGE-3, Signal Diode | BAS116 vs BAS116-T |
BAS116 Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the BAS116 is to use a symmetrical layout with the device centered on the PCB, and to keep the input and output traces as short as possible to minimize parasitic inductance and capacitance. Additionally, it is recommended to use a solid ground plane and to decouple the device with a 100nF capacitor.
-
To ensure the BAS116 is properly biased, make sure to connect the VCC pin to a stable voltage source between 1.65V and 5.5V, and the GND pin to a solid ground plane. Also, ensure that the input voltage is within the recommended range of 0V to VCC, and that the output is not loaded with a impedance lower than 1kΩ.
-
The BAS116 can handle a maximum current of 100mA, but it is recommended to keep the current below 50mA to ensure reliable operation and to prevent overheating.
-
To protect the BAS116 from ESD damage, it is recommended to use ESD protection devices such as TVS diodes or ESD protection arrays on the input and output lines, and to handle the device with an anti-static wrist strap or mat.
-
The BAS116 is rated for operation up to 125°C, but it is recommended to derate the device's performance and to ensure proper cooling to prevent overheating. Additionally, it is recommended to consult the datasheet and application notes for specific guidance on high-temperature operation.