Part Details for B82723A2602N001 by TDK Electronics

The recommended land pattern for the B82723A2602N001 can be found in the TDK Corporation's application note or footprint library. It typically includes a rectangular pad with a size of around 2.5mm x 1.5mm, with a 0.5mm hole in the center for the inductor's terminal.

The thermal derating of the B82723A2602N001 inductor is typically handled by reducing the maximum current rating as the operating temperature increases. TDK Corporation provides a thermal derating curve in the datasheet, which shows the maximum current rating at different temperatures. Engineers should ensure that their design takes into account the expected operating temperature and adjusts the current rating accordingly.

The self-resonant frequency of the B82723A2602N001 inductor is not explicitly stated in the datasheet. However, it can be estimated using the inductor's inductance value and the parasitic capacitance. Typically, the self-resonant frequency of an inductor is around 10-20 times its operating frequency. In this case, the self-resonant frequency would be around 100-200 MHz, assuming an operating frequency of 10-20 MHz.

The B82723A2602N001 inductor is designed to meet the vibration requirements of IEC 60068-2-6, which includes vibration testing up to 10G. However, engineers should still perform their own vibration testing and analysis to ensure that the inductor meets the specific requirements of their application.

To ensure the reliability of the B82723A2602N001 inductor in a high-reliability application, engineers should follow TDK Corporation's recommended storage and handling procedures, as well as perform their own reliability testing and analysis. This may include accelerated life testing, environmental testing, and failure mode and effects analysis (FMEA).