Part Details for AUIPS7125RTRL by International Rectifier
Results Overview of AUIPS7125RTRL by International Rectifier
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Renewable Energy
Automotive
AUIPS7125RTRL Information
AUIPS7125RTRL by International Rectifier is a Peripheral Driver.
Peripheral Drivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Part Details for AUIPS7125RTRL
AUIPS7125RTRL CAD Models
AUIPS7125RTRL Part Data Attributes
|
|
AUIPS7125RTRL
International Rectifier
Buy Now
Datasheet
|
Compare Parts:
AUIPS7125RTRL
International Rectifier
Buffer/Inverter Based Peripheral Driver, 1 Driver, PSSO4, ROHS COMPLIANT, TO-252, DPAK, 5 PIN
|
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | INTERNATIONAL RECTIFIER CORP | |
| Part Package Code | TO-252 | |
| Package Description | ROHS COMPLIANT, TO-252, DPAK, 5 PIN | |
| Pin Count | 3 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Built-in Protections | TRANSIENT; OVER CURRENT | |
| Driver Number of Bits | 1 | |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER | |
| JESD-30 Code | R-PSSO-G4 | |
| JESD-609 Code | e3 | |
| Length | 6.54 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 4 | |
| Output Current Flow Direction | SINK | |
| Output Current-Max | 3.8 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TO-252 | |
| Package Equivalence Code | SMSIP5H,.37,50TB | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.52 mm | |
| Supply Voltage-Max | 50 V | |
| Supply Voltage-Min | 6 V | |
| Supply Voltage-Nom | 28 V | |
| Surface Mount | YES | |
| Terminal Finish | TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.14 mm | |
| Terminal Position | SINGLE | |
| Turn-off Time | 120 µs | |
| Turn-on Time | 30 µs | |
| Width | 6.095 mm |
Alternate Parts for AUIPS7125RTRL
This table gives cross-reference parts and alternative options found for AUIPS7125RTRL. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AUIPS7125RTRL, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AUIPS7125R | International Rectifier | Check for Price | Buffer/Inverter Based Peripheral Driver, 1 Driver, PSSO4, ROHS COMPLIANT, TO-252, DPAK, 5 PIN | AUIPS7125RTRL vs AUIPS7125R |
AUIPS7125RTRL Frequently Asked Questions (FAQ)
-
The maximum operating temperature range for the AUIPS7125RTRL is -40°C to 150°C.
-
To ensure proper biasing, the AUIPS7125RTRL requires a minimum of 5V on the VCC pin and a maximum of 15V on the VIN pin. Additionally, the input voltage should be within the recommended operating range of 12V to 15V.
-
For optimal performance, it is recommended to follow a 4-layer PCB stack-up with a solid ground plane, and to place the AUIPS7125RTRL near the input capacitors to minimize loop inductance. Additionally, a thermal pad should be connected to a heat sink or a thermal relief pattern to dissipate heat.
-
To protect the AUIPS7125RTRL from overvoltage and undervoltage conditions, it is recommended to use a voltage supervisor or a reset IC to monitor the input voltage and reset the device if it falls outside the recommended operating range.
-
The recommended input capacitor value is 10uF to 22uF, with a voltage rating of 25V or higher. A low-ESR ceramic capacitor or a film capacitor is recommended to minimize power supply noise and ripple.