Part Details for ATSAMD10D14A-MNT by Atmel Corporation
Results Overview of ATSAMD10D14A-MNT by Atmel Corporation
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (3 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Internet of Things (IoT)
Smart Cities
ATSAMD10D14A-MNT Information
ATSAMD10D14A-MNT by Atmel Corporation is a Microcontroller.
Microcontrollers are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Part Details for ATSAMD10D14A-MNT
ATSAMD10D14A-MNT CAD Models
ATSAMD10D14A-MNT Part Data Attributes
|
|
ATSAMD10D14A-MNT
Atmel Corporation
Buy Now
Datasheet
|
Compare Parts:
ATSAMD10D14A-MNT
Atmel Corporation
RISC Microcontroller, CMOS,
|
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ATMEL CORP | |
| Package Description | QFN-24 | |
| Reach Compliance Code | unknown | |
| ECCN Code | 3A991.A.2 | |
| HTS Code | 8542.31.00.01 | |
| Date Of Intro | 2016-04-19 | |
| Has ADC | YES | |
| Address Bus Width | ||
| Bit Size | 32 | |
| CPU Family | CORTEX-M0 | |
| Clock Frequency-Max | 48 MHz | |
| DAC Channels | YES | |
| DMA Channels | YES | |
| External Data Bus Width | ||
| JESD-30 Code | S-PQCC-N24 | |
| Length | 4 mm | |
| Low Power Mode | YES | |
| Number of DMA Channels | 6 | |
| Number of External Interrupts | 8 | |
| Number of I/O Lines | 22 | |
| Number of Terminals | 24 | |
| Number of Timers | 2 | |
| On Chip Data RAM Width | 32 | |
| On Chip Program ROM Width | 8 | |
| Operating Temperature-Max | 105 °C | |
| Operating Temperature-Min | -40 °C | |
| PWM Channels | YES | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | QCCN | |
| Package Equivalence Code | LCC24,.16SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER | |
| RAM (bytes) | 4096 | |
| RAM (words) | 1024 | |
| ROM (words) | 16384 | |
| ROM Programmability | FLASH | |
| Seated Height-Max | 0.9 mm | |
| Speed | 48 MHz | |
| Supply Current-Max | 4.07 mA | |
| Supply Voltage-Max | 3.63 V | |
| Supply Voltage-Min | 3.3 V | |
| Supply Voltage-Nom | 3.3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Width | 4 mm | |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
Alternate Parts for ATSAMD10D14A-MNT
This table gives cross-reference parts and alternative options found for ATSAMD10D14A-MNT. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ATSAMD10D14A-MNT, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ATSAMD10D14A-MUT | Microchip Technology Inc | Check for Price | IC MCU 32BIT 16KB FLASH 24QFN | ATSAMD10D14A-MNT vs ATSAMD10D14A-MUT |