Part Details for ATMEGA8L-8MUR by Atmel Corporation
Results Overview of ATMEGA8L-8MUR by Atmel Corporation
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
ATMEGA8L-8MUR Information
ATMEGA8L-8MUR by Atmel Corporation is a Microcontroller.
Microcontrollers are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Price & Stock for ATMEGA8L-8MUR
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Peripheral ICs | 15716 |
|
RFQ |
Part Details for ATMEGA8L-8MUR
ATMEGA8L-8MUR CAD Models
ATMEGA8L-8MUR Part Data Attributes
|
|
ATMEGA8L-8MUR
Atmel Corporation
Buy Now
Datasheet
|
Compare Parts:
ATMEGA8L-8MUR
Atmel Corporation
RISC Microcontroller, 8-Bit, FLASH, AVR RISC CPU, 8MHz, CMOS, 5 X 5 MM, 1MM HEIGHT, 0.50 MM PITCH, GREEN, MO-220VHHD-2, MLF-32
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | ATMEL CORP | |
| Part Package Code | QFN | |
| Package Description | 5 X 5 MM, 1MM HEIGHT, 0.50 MM PITCH, GREEN, MO-220VHHD-2, MLF-32 | |
| Pin Count | 32 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.31.00.01 | |
| Core Architecture | AVR | |
| Device Core | AVR | |
| Clock Speed | 16 | |
| Ram | 1 | |
| Flash Memory | 8 | |
| Can | 0 | |
| Adc Channels | 8 | |
| Adc Resolution | 10 | |
| Has ADC | YES | |
| Address Bus Width | ||
| Bit Size | 8 | |
| CPU Family | AVR RISC | |
| Clock Frequency-Max | 8 MHz | |
| DAC Channels | NO | |
| DMA Channels | NO | |
| External Data Bus Width | ||
| JESD-30 Code | S-XQCC-N32 | |
| JESD-609 Code | e3 | |
| Length | 5 mm | |
| Moisture Sensitivity Level | 1 | |
| Number of I/O Lines | 23 | |
| Number of Terminals | 32 | |
| On Chip Program ROM Width | 8 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| PWM Channels | YES | |
| Package Body Material | UNSPECIFIED | |
| Package Code | HVQCCN | |
| Package Equivalence Code | LCC32,.2SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| RAM (bytes) | 1024 | |
| ROM (words) | 8192 | |
| ROM Programmability | FLASH | |
| Seated Height-Max | 1 mm | |
| Speed | 8 MHz | |
| Supply Current-Max | 5 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 2.7 V | |
| Supply Voltage-Nom | 3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Width | 5 mm | |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
Alternate Parts for ATMEGA8L-8MUR
This table gives cross-reference parts and alternative options found for ATMEGA8L-8MUR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of ATMEGA8L-8MUR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| ATMEGA8L-8MUR | Microchip Technology Inc | $3.1886 | IC MCU 8BIT 8KB FLASH 32VQFN | ATMEGA8L-8MUR vs ATMEGA8L-8MUR |
ATMEGA8L-8MUR Frequently Asked Questions (FAQ)
-
The maximum clock frequency for ATMEGA8L-8MUR is 8 MHz, but it can be overclocked up to 16 MHz with some limitations. However, it's not recommended to exceed the maximum specified frequency to ensure reliable operation.
-
The BOD in ATMEGA8L-8MUR can be configured using the BODLEVEL fuse bits. The BOD can be set to detect voltage levels between 2.7V and 4.3V. The BOD is enabled by default, but it can be disabled by setting the BODENABLE fuse bit to 0.
-
The minimum voltage required for programming the ATMEGA8L-8MUR is 4.5V. However, it's recommended to use a voltage between 5V and 5.5V for reliable programming.
-
Yes, the ATMEGA8L-8MUR can be used in a 3.3V system, but it requires some considerations. The microcontroller's I/O pins are 5V tolerant, but the internal logic operates at 3.3V. Additionally, the clock frequency may need to be reduced to ensure reliable operation at 3.3V.
-
The ATMEGA8L-8MUR has a built-in watchdog timer (WDT) that can be enabled and configured using the WDTCSR register. The WDT can be set to timeout periods between 16ms and 2048ms, and it can be reset using the WDR instruction or by writing to the WDTCSR register.